How to replace the front brake line on 2007 Chevrolet Equinox?

You should first lift and support the vehicle before starting the job. Then remove the tire and wheel before continuing. Disconnect the wheel speed sensor wire harness retainers from the front brake hose and pull free the sensor harness contraction. Also remove any debris found on the hydraulic system at the brake hose ends and brake pipe assembly. Using both wrenches disengage the brake pipe fitting from brake hose while sealing its ends. Take off both the brake hose from its bracket at the mounting points. Afterwards remove the bolts from the brake hose fitting on the brake caliper and the brake bracket. Take out the brake hose from the brake caliper and dispose of the copper brake hose gaskets since they may be attached to either component. Clog the brake caliper and brake hose openings to protect the fluid from leaking out or getting dirty. When installing the new copper brake gaskets you must first take off the caps from their openings. Insert the new copper brake hose gaskets and brake hose bolt onto the brake hose. Install the brake hose fitting bolt to the brake caliper while tightening it to 40 n.m (30 lb ft). Secure the front brake hose bracket bolt at 12 n.m (106 lb in) then open both brake system caps to connect the brake pipe. Apply the back up wrench on the hose fitting and join the brake pipe fitting at the front brake hose while tightened to 13 pounds force inside. Put the brake hose retaining clip onto both brake hose and mounting bracket before attaching the wheel speed sensor wire harness and its retainers to the front brake hose. Install the wheel back into its position on the car while making sure the hose stays away from suspension components when you turn the steering wheel fully left or right; replace the hose when the problem exists. Close both hydraulic brake circuits with the appropriate tools and put the vehicle back into its resting position.

OEM 2007 Chevrolet Equinox Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2007 Chevrolet Equinox Flex Hose, Passenger Side
Part Number: 84068673
$30.02 MSRP: $56.35
You Save: $26.33 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15914569, 25903683, 22910277, 23240857
- Item Weight: 0.60 Pounds
- Item Dimensions: 22.9 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84068673
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2007 Chevrolet Equinox Flex Hose, Driver Side
Part Number: 84068674
$27.68 MSRP: $50.08
You Save: $22.40 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 25903682, 15914568, 23240856, 22910276
- Item Weight: 0.60 Pounds
- Item Dimensions: 20.6 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84068674
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2007 Chevrolet Equinox Brake Hose, Passenger Side
Part Number: 15223828
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.1 x 4.7 x 4.5 inches
- Condition: New
- SKU: 15223828
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2007 Chevrolet Equinox Brake Hose, Driver Side
Part Number: 15223827
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 20.7 x 2.6 x 2.3 inches
- Condition: New
- SKU: 15223827
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2007 Chevrolet Equinox Flex Hose, Passenger Side
Part Number: 22706575
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.4 x 4.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2007 Chevrolet Equinox Flex Hose, Driver Side
Part Number: 22706571
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 12.1 x 1.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22706571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2007 Chevrolet Equinox Flex Hose, Front Passenger Side
Part Number: 20789413
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15223063, 25903641
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 3.1 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20789413
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2007 Chevrolet Equinox Flex Hose, Front Driver Side
Part Number: 20789412
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15223062, 25903640
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 20.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20789412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2007 Chevrolet Equinox Brake Line

With a comprehensive array of OEM 2007 Chevrolet Equinox Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Equinox Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Equinox Brake Line Parts Questions & Experts Answers

Q: How to replace the front brake line on 2007 Chevrolet Equinox?
A: You should first lift and support the vehicle before starting the job. Then remove the tire and wheel before continuing. Disconnect the wheel speed sensor wire harness retainers from the front brake hose and pull free the sensor harness contraction. Also remove any debris found on the hydraulic system at the brake hose ends and brake pipe assembly. Using both wrenches disengage the brake pipe fitting from brake hose while sealing its ends. Take off both the brake hose from its bracket at the mounting points. Afterwards remove the bolts from the brake hose fitting on the brake caliper and the brake bracket. Take out the brake hose from the brake caliper and dispose of the copper brake hose gaskets since they may be attached to either component. Clog the brake caliper and brake hose openings to protect the fluid from leaking out or getting dirty. When installing the new copper brake gaskets you must first take off the caps from their openings. Insert the new copper brake hose gaskets and brake hose bolt onto the brake hose. Install the brake hose fitting bolt to the brake caliper while tightening it to 40 n.m (30 lb ft). Secure the front brake hose bracket bolt at 12 n.m (106 lb in) then open both brake system caps to connect the brake pipe. Apply the back up wrench on the hose fitting and join the brake pipe fitting at the front brake hose while tightened to 13 pounds force inside. Put the brake hose retaining clip onto both brake hose and mounting bracket before attaching the wheel speed sensor wire harness and its retainers to the front brake hose. Install the wheel back into its position on the car while making sure the hose stays away from suspension components when you turn the steering wheel fully left or right; replace the hose when the problem exists. Close both hydraulic brake circuits with the appropriate tools and put the vehicle back into its resting position.