How to replace the front crankshaft seal on 2006 Chevrolet Impala?

The first step to replace the crankshaft front oil seal requires removing the crankshaft balancer then discarding the old crankshaft oil seal (140). The sealing surface of the oil seal must stay ungreased while the old oil seal should not get used a second time. The outer edge of new oil seal (140) and front cover oil seal bore requires engine oil lubrication for installation. You should mount the crankshaft front oil seal (140) onto the Crankshaft Front Oil Seal Installer (J41478). The threaded rod J41478 must be inserted along with the nut washer guide and oil seal into the crankshaft end. The J41478 tool enables installation of the oil seal into the cover bore through holding the hex of the installer bolt while turning the installer nut clockwise with two wrenches. The seal must be fully seated before stopping. Verify that the front cover bore hosts the oil seal in an even and complete position after using the J41478 to install it. Finally, reinstall the crankshaft balancer.

OEM 2006 Chevrolet Impala Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshaft Seals found

View related parts
2006 Chevrolet Impala Rear Main Seal
Part Number: 12592195
$43.74 MSRP: $75.13
You Save: $31.39 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Timing Cover Seal; Rear Main Seal Retainer; Seal Kit, Engine Rear Main Bearing
- Position: Rear
- Replaces: 14085829
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 4.1 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12592195
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Impala Rear Main Seal
Part Number: 89060436
$22.03 MSRP: $36.30
You Save: $14.27 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12550574, 12585671, 89018162
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.1 x 5.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89060436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- SS | 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Impala Rear Main Seal, Front
Part Number: 14090906
$21.11 MSRP: $39.63
You Save: $18.52 (47%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Seal; Front Cover Seal; Engine Front Cover Seal.
- Position: Front
- Replaces: 12577710
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 3.0 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 14090906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Impala Crankshaft Seal

With a comprehensive array of OEM 2006 Chevrolet Impala Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Impala Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the front crankshaft seal on 2006 Chevrolet Impala?
A: The first step to replace the crankshaft front oil seal requires removing the crankshaft balancer then discarding the old crankshaft oil seal (140). The sealing surface of the oil seal must stay ungreased while the old oil seal should not get used a second time. The outer edge of new oil seal (140) and front cover oil seal bore requires engine oil lubrication for installation. You should mount the crankshaft front oil seal (140) onto the Crankshaft Front Oil Seal Installer (J41478). The threaded rod J41478 must be inserted along with the nut washer guide and oil seal into the crankshaft end. The J41478 tool enables installation of the oil seal into the cover bore through holding the hex of the installer bolt while turning the installer nut clockwise with two wrenches. The seal must be fully seated before stopping. Verify that the front cover bore hosts the oil seal in an even and complete position after using the J41478 to install it. Finally, reinstall the crankshaft balancer.