How to replace the intake manifold on 2006 Chevrolet Malibu?

To replace the Intake Manifold, start by removing the air cleaner outlet resonator, the Throttle Body, the pcv hose, the purge solenoid tube, the brake booster hose, and the oil indicator tube bolt. Now, detach the fuel railing, disconnect the electrical to the knock sensor, and detach the harness connector from the intake drawer. Then, go ahead and remove the Intake Manifold nuts and bolts and take out the Intake Manifold. The Intake Manifold Gasket can be used again; replace it only if damaged. For installation, in case of it being removable, put in the Intake Manifold by first installing the Intake Manifold Gasket. Install the Intake Manifold nuts and bolts while tightening them to 10 nm (89 inch lbs). Ensure that all components are properly aligned and secured to prevent any air leaks or engine performance issues. Reconnect the knock sensor harness connector and the knock sensor electrical connector as well as the Fuel Rail and the Throttle Body. Lastly, reattach the oil level indicator tube bolt, at 10 nm (89 inch lbs.) reattach the brake booster hose, purge solenoid tube and the pcv hose; finish the throttle air cleaner outlet resonator re-installed.

OEM 2006 Chevrolet Malibu Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifolds found

View related parts
2006 Chevrolet Malibu Plenum Gasket
Part Number: 12626552
$164.32 MSRP: $243.91
You Save: $79.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold; Intake Plenum Gasket; Intake Plenum
- Position: Upper
- Replaces: 89018046
- Item Weight: 16.30 Pounds
- Item Dimensions: 22.5 x 18.4 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12626552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Maxx SS, SS | 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Intake Plenum
Part Number: 12604753
$129.72 MSRP: $192.56
You Save: $62.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Position: Upper
- Replaces: 12596912
- Item Weight: 8.90 Pounds
- Item Dimensions: 26.0 x 12.4 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12604753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.5 L GAS
View related parts
2006 Chevrolet Malibu Intake Manifold
Part Number: 12608305
$94.44 MSRP: $147.94
You Save: $53.50 (37%)
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Replaces: 12587202, 24467211
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.5 x 18.5 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS
View related parts
2006 Chevrolet Malibu Intake Manifold
Part Number: 89017809
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold; Intake Plenum
- Position: Lower
- Item Weight: 10.30 Pounds
- Item Dimensions: 21.2 x 14.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017809
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- LS, LT, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Intake Manifold, Lower
Part Number: 12590281
Product Specifications
- Other Name: Manifold Assembly-Lower Intake; Manifold, Engine Fuel Intake Manifold
- Position: Lower
- Item Weight: 13.20 Pounds
- Item Dimensions: 25.6 x 17.2 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12590281
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ | 6 Cyl 3.5 L GAS

2006 Chevrolet Malibu Intake Manifold

With a comprehensive array of OEM 2006 Chevrolet Malibu Intake Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Malibu Intake Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Malibu Intake Manifold Parts Questions & Experts Answers

Q: How to replace the intake manifold on 2006 Chevrolet Malibu?
A: To replace the Intake Manifold, start by removing the air cleaner outlet resonator, the Throttle Body, the pcv hose, the purge solenoid tube, the brake booster hose, and the oil indicator tube bolt. Now, detach the fuel railing, disconnect the electrical to the knock sensor, and detach the harness connector from the intake drawer. Then, go ahead and remove the Intake Manifold nuts and bolts and take out the Intake Manifold. The Intake Manifold Gasket can be used again; replace it only if damaged. For installation, in case of it being removable, put in the Intake Manifold by first installing the Intake Manifold Gasket. Install the Intake Manifold nuts and bolts while tightening them to 10 nm (89 inch lbs). Ensure that all components are properly aligned and secured to prevent any air leaks or engine performance issues. Reconnect the knock sensor harness connector and the knock sensor electrical connector as well as the Fuel Rail and the Throttle Body. Lastly, reattach the oil level indicator tube bolt, at 10 nm (89 inch lbs.) reattach the brake booster hose, purge solenoid tube and the pcv hose; finish the throttle air cleaner outlet resonator re-installed.