How to replace the Coolant Temperature Sensor on 2006 Chevrolet Monte Carlo?

A cooling system drain operation below the ECT sensor height marks the first step to replace the Engine Coolant Temperature sensor. First disconnect the ECT sensor electrical connector before removing the ECT sensor. Before sensor installation verify that the new ECT sensor matches the correct part number for your application then apply GM P/N 12346004 sealer (Canadian P/N 10953480) or equivalent to the thread. The newly installed ECT sensor requires a torque setting of 20 N.m (15 lb ft). After connecting the ECT sensor electrical connector you should refill engine coolant. New installers must exercise caution when working with coolant sensors since damage can manifest into operational fuel control failures and new installers must use proper torque specifications to prevent system damage.

OEM 2006 Chevrolet Monte Carlo Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2006 Chevrolet Monte Carlo Coolant Temperature Sensor, Black
Part Number: 12608814
$30.83 MSRP: $57.90
You Save: $27.07 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Coolant Temperature *Ite Or Black; Engine Coolant Temperature Sensor; Temperature Sensor; Temperature Sending Unit; Coolant Temperature Sensor; Engine Oil Pressure/Temperature Sensor; Computer Control Sensors
- Replaces: 15369305, 25037062, 12191170, 15326388
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Monte Carlo Coolant Temperature Sensor

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the Coolant Temperature Sensor on 2006 Chevrolet Monte Carlo?
A: A cooling system drain operation below the ECT sensor height marks the first step to replace the Engine Coolant Temperature sensor. First disconnect the ECT sensor electrical connector before removing the ECT sensor. Before sensor installation verify that the new ECT sensor matches the correct part number for your application then apply GM P/N 12346004 sealer (Canadian P/N 10953480) or equivalent to the thread. The newly installed ECT sensor requires a torque setting of 20 N.m (15 lb ft). After connecting the ECT sensor electrical connector you should refill engine coolant. New installers must exercise caution when working with coolant sensors since damage can manifest into operational fuel control failures and new installers must use proper torque specifications to prevent system damage.