How to replace the steering knuckle on 2006 Chevrolet Monte Carlo?

To replace the Steering Knuckle, lift and appropriately support the vehicle, first. Take away the bearing/hub assembly, and then unscrew the front lower control arm ball stud, and the outmost part of the Steering Knuckle's Tie Rod End. Scribe the strut to the knuckle and then remove the bolts and nuts attaching the strut hat the knuckle and finally take the knuckle of the vehicle. For installation, put back the knuckle on the vehicle and install the knuckle struts to bolt with nuts followed by tightening the strut to knuckle bolts at 130 nm(96 ft. Lbs.). Next, install the outer tie rod to Steering Knuckle, and attach the front lower control arm ball stud to it as well. Installer the front wheel drive shaft bearing, lower the vehicle, and check the front wheel alignment at last and adjust if necessary.

OEM 2006 Chevrolet Monte Carlo Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2006 Chevrolet Monte Carlo Knuckle, Driver Side
Part Number: 23130696
$388.19 MSRP: $639.48
You Save: $251.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Driver Side
- Replaces: 19151396, 18022046, 25816705, 18060616
- Item Weight: 4.50 Pounds
- Item Dimensions: 13.4 x 11.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Knuckle, Driver Side
Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Knuckle, Passenger Side
Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Knuckle, Passenger Side
Part Number: 23130695
$433.92 MSRP: $623.98
You Save: $190.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Passenger Side
- Replaces: 19151397, 18022047, 18060617, 25816704
- Item Weight: 4.10 Pounds
- Item Dimensions: 14.0 x 10.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Monte Carlo Steering Knuckle

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the steering knuckle on 2006 Chevrolet Monte Carlo?
A: To replace the Steering Knuckle, lift and appropriately support the vehicle, first. Take away the bearing/hub assembly, and then unscrew the front lower control arm ball stud, and the outmost part of the Steering Knuckle's Tie Rod End. Scribe the strut to the knuckle and then remove the bolts and nuts attaching the strut hat the knuckle and finally take the knuckle of the vehicle. For installation, put back the knuckle on the vehicle and install the knuckle struts to bolt with nuts followed by tightening the strut to knuckle bolts at 130 nm(96 ft. Lbs.). Next, install the outer tie rod to Steering Knuckle, and attach the front lower control arm ball stud to it as well. Installer the front wheel drive shaft bearing, lower the vehicle, and check the front wheel alignment at last and adjust if necessary.