How to replace the rear suspension sway bar link on 2006 Chevrolet Monte Carlo?

The first step before changing the Sway Bar Link in the rear suspension involves lifting the vehicle and providing adequate support. Disassemble the Sway Bar Link by removing both its Sway Bar Link nut and Sway Bar Link and Sway Bar Link nut. Reassemble by installing the Sway Bar Link first into position and then connecting it to Sway Bar Link and sway bar. The Sway Bar Link must be removed from the vehicle after disabling its seals. Place the Sway Bar Link inside the vehicle until it reaches the sway bar while continuing with the installation steps. Begin the installation by tightening the lower Sway Bar Link nut at 50 nm (37 ft. Lbs.) while connecting it between the Sway Bar Link and sway bar. The Sway Bar Link can be mounted to the strut after which the upper Sway Bar Link nut should be installed on both components. Tighten this nut to 52 nm (38 ft. Lbs.). Finally, lower the vehicle.

OEM 2006 Chevrolet Monte Carlo Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2006 Chevrolet Monte Carlo Stabilizer Link, Rear
Part Number: 20985982
$38.77 MSRP: $72.80
You Save: $34.03 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link-Rear Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link; Link, Stabilizer Shaft
- Position: Rear
- Replaces: 10320234, 10402711, 10257811, 10410748, 10415034, 10413928, 10424646
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.6 x 3.9 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20985982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Stabilizer Link, Front
Part Number: 19417578
$25.38 MSRP: $47.65
You Save: $22.27 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly, Front Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Link; Link, Stabilizer Shaft
- Position: Front
- Replaces: 10292672, 10285683, 10403402
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.9 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417578
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Monte Carlo Sway Bar Link

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the rear suspension sway bar link on 2006 Chevrolet Monte Carlo?
A: The first step before changing the Sway Bar Link in the rear suspension involves lifting the vehicle and providing adequate support. Disassemble the Sway Bar Link by removing both its Sway Bar Link nut and Sway Bar Link and Sway Bar Link nut. Reassemble by installing the Sway Bar Link first into position and then connecting it to Sway Bar Link and sway bar. The Sway Bar Link must be removed from the vehicle after disabling its seals. Place the Sway Bar Link inside the vehicle until it reaches the sway bar while continuing with the installation steps. Begin the installation by tightening the lower Sway Bar Link nut at 50 nm (37 ft. Lbs.) while connecting it between the Sway Bar Link and sway bar. The Sway Bar Link can be mounted to the strut after which the upper Sway Bar Link nut should be installed on both components. Tighten this nut to 52 nm (38 ft. Lbs.). Finally, lower the vehicle.