How to replace the Brake Proportioning Valve on 2006 Chevrolet Silverado 1500?

In order to provide the replacement of the combination valve, record the identification code of the current valve. Take off the electrical connector and brake pipes then remove the valve. Installation can be done by ensuring the new valve is similar to the code, and once fitted the electrical connector can be reconnected and the brake system bled by pressing the metering rod.

OEM 2006 Chevrolet Silverado 1500 Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Proportioning Valve found

View related parts
2006 Chevrolet Silverado 1500 Modulator Valve Part Number: 89027166
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Valve, Electronic Brake Control
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.2 x 8.2 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027166
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Silverado 1500 Submodels:
- LS, LT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Silverado 1500 Brake Proportioning Valve

With a comprehensive array of OEM 2006 Chevrolet Silverado 1500 Brake Proportioning Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Silverado 1500 Brake Proportioning Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Silverado 1500 Brake Proportioning Valve Parts and Q&A

Q: How to replace the Brake Proportioning Valve on 2006 Chevrolet Silverado 1500?
A: In order to provide the replacement of the combination valve, record the identification code of the current valve. Take off the electrical connector and brake pipes then remove the valve. Installation can be done by ensuring the new valve is similar to the code, and once fitted the electrical connector can be reconnected and the brake system bled by pressing the metering rod.