How to replace the liftgate hinge on 2006 Chevrolet Uplander?

To replace the liftgate hinge start by taking off the liftgate and moving on to the headliner. Set the liftgate hinge position with a grease pencil on the body and detach the retaining nuts found on the roof before taking the hinge down. During installation line up the hinge marks from the body with their matching positions. Do this to comply with Fastener Notice specifications. Locate the hinge retaining nuts and fit them properly before squeezing the liftgate hinge nuts to 25 N.m (18 lb ft). Reattach both the headliner and the liftgate after completion.

OEM 2006 Chevrolet Uplander Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Liftgate Hinge found

View related parts
2006 Chevrolet Uplander Hinge Part Number: 10395371
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate; Hinge, End Gate Closing
- Replaces: 10400564
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.1 x 5.3 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10395371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Uplander Liftgate Hinge

With a comprehensive array of OEM 2006 Chevrolet Uplander Liftgate Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Uplander Liftgate Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Uplander Liftgate Hinge Parts and Q&A

Q: How to replace the liftgate hinge on 2006 Chevrolet Uplander?
A: To replace the liftgate hinge start by taking off the liftgate and moving on to the headliner. Set the liftgate hinge position with a grease pencil on the body and detach the retaining nuts found on the roof before taking the hinge down. During installation line up the hinge marks from the body with their matching positions. Do this to comply with Fastener Notice specifications. Locate the hinge retaining nuts and fit them properly before squeezing the liftgate hinge nuts to 25 N.m (18 lb ft). Reattach both the headliner and the liftgate after completion.