OEM 2007 Buick Lucerne Parking Brake Cable

2007 Buick Lucerne Parts Questions & Experts Answers

• Q: How to replace the left rear parking brake cable on 2007 Buick Lucerne?

  A: Begin with releasing the park brake then raising the vehicle before beginning the left rear park brake cable replacement process. The first step involves removing the wheel combined with the tire followed by disconnecting the front brake cable from its connector. The equalizer requires direct replacement in case it gets damaged. The goal is now to detach the left rear brake cable from its position on the equalizer. The left park brake cable requires j 37043 to separate it from both retaining bracket and then remove from the retainer followed by left rear brake cable removal from its retainer. Pay attention to the right rear brake caliper as you remove its corresponding left rear brake cable retaining bolt. Indicator the park brake cable toward the front to disconnect it from the park brake actuator lever before removing it from around the caliper . The park brake cable installation begins by placing it into the brake caliper bracket following forward movement before fastening it to the park brake actuator lever. To install this component bolt down the retaining bolt while tightening it to 6 n.m (53 lb in), set the retaining clip into place. Put the left rear brake cable into the retainer and the retaining bracket before connecting it to the equalizer while simultaneously linking the front brake cable to the connector. Complete the process by reinstalling the tire with wheel and return the vehicle back to its resting position.