OEM 2007 Buick Rainier Air Suspension Compressor

Suspension Levelling Compressor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Suspension Compressor found

  • 2007 Buick Rainier Air Suspension Compressor Diagram - 25978169
    View related parts
    Product Specifications
    • Other Name: Compressor Assembly-Rear Air Spring; Air Suspension Compressor; Compressor
    • Position: Rear
    • Replaces: 15187099, 15094346, 15145230, 25789710, 15006679, 25878674
    • Item Weight: 10.10 Pounds
    • Item Dimensions: 14.2 x 14.0 x 10.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25978169
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Rainier Submodels:
    • CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2007 Buick Rainier Air Suspension Compressor

With a comprehensive array of OEM 2007 Buick Rainier Air Suspension Compressor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rainier Air Suspension Compressor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rainier Air Suspension Compressor Parts and Q&A

  • Q: How to replace the Air Suspension Compressor safely and effectively on 2007 Buick Rainier?
    A: Wear appropriate protection during replacement such as gloves along with ear and eye gear before using a clean cloth to wrap air supply lines to avoid pressure-related injuries. Support your vehicle between D-Height and Full Jounce without pressurized air first and disconnect the air suspension system fuse before depressurizing. Start by lifting the vehicle to a proper height and secure it before removing the air spring compressor bolts on the frame mounting. The maintenance process commences with disconnecting electrical connections for the air inflator switch as well as the air supply lines and vent hose from the air spring compressor followed by separating the electrical connector from the air spring compressor. Disconnect the air supply lines from the air spring compressor and remove the compressor from the vehicle when ensuring that air supply lines match the color markings on the air spring compressor. Check the air supply lines for any signs of damage. Replace the components with deep scores or cuts detected. Use existing fittings from the new compressor to attach the undamaged air supply lines then tighten them to 2.25 N.m (20 lb in). Install the air spring compressor electrical connections while proceeding with the air inflator switch electrical connections and then the air supply lines and air spring compressor vent hose connections. Place the air spring compressor onto the frame mounting bolts and fasten them to a torque of 20 N.m (15 lb ft). After reattaching the air suspension system fuse lower the vehicle to begin testing the air spring leveling operation during which you must keep the engine running for one minute. Examine D-height and look for any air leaks before proceeding. Replace the air supply lines once leaks are detected at the air supply line connections at the air spring compressor.

Related 2007 Buick Rainier Parts