ChevyParts
My Garage
My Account
Cart
OEM 2007 Buick Rendezvous Steering Shaft
Steering Stem Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Steering Shaft found
2007 Buick Rendezvous Lower Coupling Part Number: 10429206
$135.18 MSRP: $212.69You Save: $77.51 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Shaft Assembly-Steering Gear Coupling; Coupling; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Item Weight: 2.40 Pounds
- Item Dimensions: 14.4 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10429206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Buick Rendezvous Steering Shaft
With a comprehensive array of OEM 2007 Buick Rendezvous Steering Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Steering Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Buick Rendezvous Steering Shaft Parts Questions & Experts Answers
- Q: How to replace the intermediate steering shaft on 2007 Buick Rendezvous?A: Before disconnecting the Steering Column, Steering Shaft coupling, intermediate Steering Shaft, and lower Steering Shaft make sure the Steering Column is in the lock mode as movement of the front tyres and wheels could result in improper alignment and risks to sir coil damage. Start by fitting the Steering Column anti-rotation pin (J 42640) into the Steering Column. Turn off the ignition with wheel in straight forward direction, then lift and hold off the vehicle. Push up the intermediate shaft lower seal into the intermediate shaft upper seal to gain the access to the intermediate shaft lower bolt and remove the left front tire and wheel. Now remove the lower pinch bolt of the intermediate shaft and push the intermediate Steering Shaft up in order to separate from the steering gear. Pump down the vehicle, then take your left closeout panel off. Pull off the intermediate Steering Shaft seal down sack from the Steering Column for access of the intermediate Steering Shaft upper bolt and then remove the pinch bolt intermediate shaft to Steering Column and disengage the intermediate shaft from the Steering Column. Remove the intermediate Steering Shaft from the inside of the vehicle. For installation, place the intermediate Steering Shaft through the intermediate Steering Shaft seal and also fix it to the Steering Column. Install the upper pinch bolt of the intermediate Steering Shaft and tighten it with 48 n.m (35 lb ft). Retrace the intermediate Steering Shaft to the Steering Column, and remove the left closeout section, and elevate the vehicle. Secure the intermediate Steering Shaft to the steering gear and then attach the lower pinch bolt of the intermediate Steering Shaft by tightening it to a force of 48 n.m (35 lb ft). Check proper alignment of the intermediate Steering Shaft seal with the shaft clearance before the installation of the left front tyre and wheel and finally to lower the vehicle.