OEM 2007 Cadillac CTS Seat Cushion Pad

2007 Cadillac CTS Seat Cushion Pad Parts Questions & Experts Answers

• Q: How to replace the front seat cushion pad on 2007 Cadillac CTS?

  A: One must disable the sir system before attempting to replace the front seat cushion. Use the full forward motion of the seat to access the two retaining nuts which hold the seat cushion to the adjuster assembly. Lift the front of the seat cushion upward while you remove the power seat switches. Keep track of the electrical wiring route because any damage could occur during this process. Proceed by disconnecting the wiring harness fastener and remove the retainers which maintain the wiring harness at the bottom of the seat cushion frame. After pulling the cushion forward you can remove it from the seat adjuster assembly. Mount the seat cushion locators through the rectangular openings at the seat cushion frame rear part while following the original wiring harness placement for installation. After fitting the power seat switches, place the seat cushion front below the adjuster assembly so you can mount the nuts at 10 n.m (88 lb in). Finally, enable the sir.