OEM 2007 Cadillac DTS Timing Cover

2007 Cadillac DTS Parts Questions & Experts Answers

• Q: How to replace the engine front timing cover on 2007 Cadillac DTS?

  A: The procedure to replace the engine front cover requires sequential removal of the drive belt idler pulley followed by the crankshaft balancer before proceeding to remove the engine front cover bolts. Take off the engine front cover with its gasket but keep the gasket unless damaged as it can be reused. Smear a tiny amount of sealant onto the separation between upper and lower crankcase sections. Set the engine front cover gasket onto the crankcase dowel pins before placing the engine front cover onto the crankcase. Install the engine front cover bolts after applying thread lock to each bolt while following the provided fastener notice instructions. Apply the specified torque of 10 n.m (89 lb in) while following the bolt installation sequence to tighten engine front cover bolts. Reattach the crankshaft balancer together with the drive belt idler pulley.