Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following 2007 Cadillac DTS Submodels:
Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
2007 Cadillac DTS TPMS Sensor
With a comprehensive array of OEM 2007 Cadillac DTS TPMS Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac DTS TPMS Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac DTS TPMS Sensor Parts and Q&A
Q: How to replace the TPMS Sensor (Snap In Style) on 2007 Cadillac DTS?
A: Replacement of the tire pressure sensor (Snap In Style) must begin with vehicle elevation on a suitable stand followed by tire/wheel assembly removal. The installation requires using both a new Schrader(R) tire pressure monitor (TPM) and a new TORX screw along with the tire dismount from the rim. Safely detach the tire pressure sensor from its base by removing the TORX screw and pulling it directly off the valve stem while avoiding contact with aluminum wheel clear coatings to avoid surface corrosion. Pull the valve stem of the tire pressure through the rim completely to remove it. The valve assembly requires alignment between its flat edge and the snap enclosure components while noting that TPM valves, TORX screws exist as single-use items. Fasten the tire pressure sensor onto the valve stem then put on a new TORX screw while tightening it to 1.3 N.m (11.5 lb in). The recommended tire mounting lubricant should be used instead of products containing silicon or corrosive base compounds. Apply tire soap to the valve stem rubber and use a mounting tool to pull the valve in a direction that matches the rim's valve opening. Position the tire on the rim afterward installing the tire/wheel unit onto the vehicle before letting the vehicle rest. Laboratory courses to learn the tire pressure sensors conclude the educational segment.