How to replace the TPMS Sensor (Snap In Style) on Cadillac DTS?

Replacement of the tire pressure sensor (Snap In Style) must begin with vehicle elevation on a suitable stand followed by tire/wheel assembly removal. The installation requires using both a new Schrader(R) tire pressure monitor (TPM) and a new TORX screw along with the tire dismount from the rim. Safely detach the tire pressure sensor from its base by removing the TORX screw and pulling it directly off the valve stem while avoiding contact with aluminum wheel clear coatings to avoid surface corrosion. Pull the valve stem of the tire pressure through the rim completely to remove it. The valve assembly requires alignment between its flat edge and the snap enclosure components while noting that TPM valves, TORX screws exist as single-use items. Fasten the tire pressure sensor onto the valve stem then put on a new TORX screw while tightening it to 1.3 N.m (11.5 lb in). The recommended tire mounting lubricant should be used instead of products containing silicon or corrosive base compounds. Apply tire soap to the valve stem rubber and use a mounting tool to pull the valve in a direction that matches the rim's valve opening. Position the tire on the rim afterward installing the tire/wheel unit onto the vehicle before letting the vehicle rest. Laboratory courses to learn the tire pressure sensors conclude the educational segment.

OEM Cadillac DTS TPMS Sensor

Tire Pressure Monitoring System Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 TPMS Sensors found

View related parts
Cadillac DTS TPMS Sensor, Gray; Silver
Part Number: 20925924
$73.70 MSRP: $144.28
You Save: $70.58 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Tire Pressure Indicator; Tire Pressure Monitoring System (TPMS) Sensor; TPMS Capteur; Tire Pressure Sensor; Tire Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 10394110, 15268606, 15921013
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Cadillac DTS | Base, Luxury | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Tire Pressure Sensor, Black
Part Number: 13598909
$10.46 MSRP: $19.64
You Save: $9.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit, Tire Valve And Cover Lock; TPMS Sensor Service Kit; TPMS Sensor; Valve Stem; Repair Kit; Tire Sensor Valve; TPMS Sensor Valve Assembly; Tire Valve Kit; Vehicle Security & Safety.
- Replaces: 15263240, 19368646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Wheel Nut
Part Number: 15234846
$6.78 MSRP: $12.74
You Save: $5.96 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut, Tire Pressure; TPMS Sensor Service Kit; Valve Stem Nut; TPMS Sensor Valve; TPMS Sensor Nut; Pressure Sensor Nut; Tire Sensor Nut; Transmitter Nut; Nut, Wheel
- Replaces: 10268439, 15825474, 15125473, 25708165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac DTS | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Control Module
Part Number: 20803736
$62.60 MSRP: $172.07
You Save: $109.47 (64%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver, Door Lock Remote Control Inside; Receiver; Receiver, Door Electric And Vacuum Locks; Module, Tire Pressure; Harness, Dome Lamp
- Replaces: 15807815, 15857830, 25896540, 15946937, 25857326, 25856131, 25808836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Cadillac DTS | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS TPMS Sensor, Black
Part Number: 13540600
$57.19 MSRP: $111.00
You Save: $53.81 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Tire Pressure Indicator; Tire Pressure Sensor; Tire Sensor; Pressure Sensor; Sensor; Sensor, Vehicle Security & Safety; Sensor, Tire Pressure
- Replaces: 13598771, 15254101, 25799331, 13586335, 15825475, 15922396, 20923680, 23445327, 25920615, 22853741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

Cadillac DTS TPMS Sensor

Our website offers an extensive catalog of genuine Cadillac DTS TPMS Sensor at unbeatable prices. Every OEM Cadillac DTS TPMS Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac DTS TPMS Sensor Parts Questions & Experts Answers

Tire Pressure Sensor, Black
13598909
Q: How to replace the TPMS Sensor (Snap In Style) on Cadillac DTS?
A: Replacement of the tire pressure sensor (Snap In Style) must begin with vehicle elevation on a suitable stand followed by tire/wheel assembly removal. The installation requires using both a new Schrader(R) tire pressure monitor (TPM) and a new TORX screw along with the tire dismount from the rim. Safely detach the tire pressure sensor from its base by removing the TORX screw and pulling it directly off the valve stem while avoiding contact with aluminum wheel clear coatings to avoid surface corrosion. Pull the valve stem of the tire pressure through the rim completely to remove it. The valve assembly requires alignment between its flat edge and the snap enclosure components while noting that TPM valves, TORX screws exist as single-use items. Fasten the tire pressure sensor onto the valve stem then put on a new TORX screw while tightening it to 1.3 N.m (11.5 lb in). The recommended tire mounting lubricant should be used instead of products containing silicon or corrosive base compounds. Apply tire soap to the valve stem rubber and use a mounting tool to pull the valve in a direction that matches the rim's valve opening. Position the tire on the rim afterward installing the tire/wheel unit onto the vehicle before letting the vehicle rest. Laboratory courses to learn the tire pressure sensors conclude the educational segment.