How to replace the intermediate exhaust pipe on 2007 Cadillac XLR?

Following support of the vehicle with jacks you will need to set up adjustable stands underneath the intermediate pipe front and back. Three steps are required: loosing exhaust muffler band clamps (2, 5) and disconnecting left and right tailpipe/muffler assemblies from the intermediate pipe. You should detach the Exhaust Pipe hanger lower bolts and exhaust manifold nuts before lowering the jack stands to remove the intermediate pipe. The original intermediate pipe reinstall requires marking the Tail Pipe/muffler band clip positions before grinding off the old clips and placing new ones at their marked locations. Put the intermediate pipe on the jack stands before using them to elevate the pipe into position. Tighten all exhaust clamps along with bolts until they reach a proper alignment before taking out the adjustable jack stands. The installation process begins with clamping down exhaust muffler clips (2, 5) and exhaust clamps (2, 5, 8) to 44 n.m (32 lb ft) and then securing exhaust manifold nuts (8) to 20 n.m (15 lb ft) and Exhaust Pipe hanger lower bolts (21) to 50 n.m (37 lb ft). Finally, lower the vehicle.

OEM 2007 Cadillac XLR Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Exhaust Pipes found

View related parts
2007 Cadillac XLR Muffler & Pipe, Driver Side
Part Number: 10343506
$75.35 MSRP: $689.60
You Save: $614.25 (90%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Driver Side
- Item Weight: 22.60 Pounds
- Item Dimensions: 56.0 x 17.6 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac XLR Muffler & Pipe, Passenger Side
Part Number: 15923966
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Passenger Side
- Replaces: 10352030
- Item Weight: 25.30 Pounds
- Item Dimensions: 50.2 x 15.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2007 Cadillac XLR Muffler & Pipe, Driver Side
Part Number: 15923965
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Driver Side
- Replaces: 10352029
- Item Weight: 0.60 Pounds
- Item Dimensions: 53.5 x 15.3 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2007 Cadillac XLR Muffler & Pipe, Passenger Side
Part Number: 10343507
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Passenger Side
- Item Weight: 22.00 Pounds
- Item Dimensions: 55.4 x 17.5 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343507
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac XLR Exhaust Pipe
Part Number: 10383108
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Intermed Pipe
- Item Dimensions: 65.7 x 21.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10383108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac XLR Tailpipe, Driver Side
Part Number: 15146283
Product Specifications
- Other Name: Pipe, Exhaust Tail Pipe; Exhaust Pipe; Tail Pipe
- Position: Driver Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 10.6 x 9.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15146283
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac XLR Tailpipe, Passenger Side
Part Number: 15146284
Product Specifications
- Other Name: Pipe, Exhaust Tail Pipe; Exhaust Pipe; Tail Pipe
- Position: Passenger Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.2 x 8.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15146284
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS

2007 Cadillac XLR Exhaust Pipe

With a comprehensive array of OEM 2007 Cadillac XLR Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac XLR Exhaust Pipe Parts Questions & Experts Answers

Q: How to replace the intermediate exhaust pipe on 2007 Cadillac XLR?
A: Following support of the vehicle with jacks you will need to set up adjustable stands underneath the intermediate pipe front and back. Three steps are required: loosing exhaust muffler band clamps (2, 5) and disconnecting left and right tailpipe/muffler assemblies from the intermediate pipe. You should detach the Exhaust Pipe hanger lower bolts and exhaust manifold nuts before lowering the jack stands to remove the intermediate pipe. The original intermediate pipe reinstall requires marking the Tail Pipe/muffler band clip positions before grinding off the old clips and placing new ones at their marked locations. Put the intermediate pipe on the jack stands before using them to elevate the pipe into position. Tighten all exhaust clamps along with bolts until they reach a proper alignment before taking out the adjustable jack stands. The installation process begins with clamping down exhaust muffler clips (2, 5) and exhaust clamps (2, 5, 8) to 44 n.m (32 lb ft) and then securing exhaust manifold nuts (8) to 20 n.m (15 lb ft) and Exhaust Pipe hanger lower bolts (21) to 50 n.m (37 lb ft). Finally, lower the vehicle.