How to replace the center exhaust pipe on 2008 Cadillac XLR?

Start by securely raising and supporting the vehicle and placing adjustable jack stands below the front and rear part of the intermediate pipe. The band clamps (2, 5) securing the exhaust muffler need loose tightening before removing the left and right tailpipe/muffler components from the intermediate pipe. Beginning by removing Exhaust Pipe hanger lower bolts and exhaust manifold nuts you should then lower the jack stands before taking away the intermediate pipe. Before reinstalling the original intermediate pipe the Tail Pipe/muffler band clips must be replaced by marking their positions on the intermediate Exhaust Pipe before grinding off the old clips then placing new ones according to the marks. Install the intermediate pipe onto the jack stands before raising the stands to achieve correct position. Screw all exhaust clamps and bolts tightly but do not overtighten them due to proper alignment requirements. Remove the adjustable jack stands afterwards. Tighten the exhaust muffler clamps (2, 5) with 44 n.m (32 lb ft), while the exhaust clamps bolts must reach 44 n.m (32 lb ft) followed by torquing the exhaust manifold nuts (7, 12) to 20 n.m (15 lb ft) and the Exhaust Pipe hanger lower bolts (1, 3, 6) to 50 n.m (37 lb ft). Finally, lower the vehicle.

OEM 2008 Cadillac XLR Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Pipes found

View related parts
2008 Cadillac XLR Muffler & Pipe, Driver Side Part Number: 10343506
$75.35 MSRP: $689.60
You Save: $614.25 (90%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Driver Side
- Item Weight: 22.60 Pounds
- Item Dimensions: 56.0 x 17.6 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Muffler & Pipe, Passenger Side Part Number: 15923966
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Passenger Side
- Replaces: 10352030
- Item Weight: 25.30 Pounds
- Item Dimensions: 50.2 x 15.1 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Muffler & Pipe, Driver Side Part Number: 15923965
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Driver Side
- Replaces: 10352029
- Item Weight: 0.60 Pounds
- Item Dimensions: 53.5 x 15.3 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15923965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Muffler & Pipe, Passenger Side Part Number: 10343507
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe
- Position: Passenger Side
- Item Weight: 22.00 Pounds
- Item Dimensions: 55.4 x 17.5 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343507
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Exhaust Pipe Part Number: 25788211
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Intermed Pipe
- Item Weight: 17.00 Pounds
- Item Dimensions: 64.0 x 20.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25788211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac XLR Exhaust Pipe Part Number: 10383108
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Intermed Pipe
- Item Dimensions: 65.7 x 21.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10383108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Tailpipe, Driver Side Part Number: 15146283
Product Specifications
- Other Name: Pipe, Exhaust Tail Pipe; Exhaust Pipe; Tail Pipe
- Position: Driver Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 10.6 x 9.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15146283
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac XLR Tailpipe, Passenger Side Part Number: 15146284
Product Specifications
- Other Name: Pipe, Exhaust Tail Pipe; Exhaust Pipe; Tail Pipe
- Position: Passenger Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 10.2 x 8.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15146284
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS

2008 Cadillac XLR Exhaust Pipe

With a comprehensive array of OEM 2008 Cadillac XLR Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac XLR Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac XLR Exhaust Pipe Parts and Q&A

Q: How to replace the center exhaust pipe on 2008 Cadillac XLR?
A: Start by securely raising and supporting the vehicle and placing adjustable jack stands below the front and rear part of the intermediate pipe. The band clamps (2, 5) securing the exhaust muffler need loose tightening before removing the left and right tailpipe/muffler components from the intermediate pipe. Beginning by removing Exhaust Pipe hanger lower bolts and exhaust manifold nuts you should then lower the jack stands before taking away the intermediate pipe. Before reinstalling the original intermediate pipe the Tail Pipe/muffler band clips must be replaced by marking their positions on the intermediate Exhaust Pipe before grinding off the old clips then placing new ones according to the marks. Install the intermediate pipe onto the jack stands before raising the stands to achieve correct position. Screw all exhaust clamps and bolts tightly but do not overtighten them due to proper alignment requirements. Remove the adjustable jack stands afterwards. Tighten the exhaust muffler clamps (2, 5) with 44 n.m (32 lb ft), while the exhaust clamps bolts must reach 44 n.m (32 lb ft) followed by torquing the exhaust manifold nuts (7, 12) to 20 n.m (15 lb ft) and the Exhaust Pipe hanger lower bolts (1, 3, 6) to 50 n.m (37 lb ft). Finally, lower the vehicle.