ChevyParts
My Garage
My Account
Cart
OEM 2007 Cadillac XLR Wiper Arm
Windshield Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Arms found
2007 Cadillac XLR Wiper Arm, Passenger Side Part Number: 10436442
Product Specifications- Other Name: Arm, Windshield Wiper Arm
- Position: Passenger Side
- Item Weight: 1.70 Pounds
- Item Dimensions: 27.3 x 3.2 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10436442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Cadillac XLR Wiper Arm, Driver Side Part Number: 10436443
Product Specifications- Other Name: Arm, Windshield Wiper Arm
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 24.4 x 3.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10436443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Cadillac XLR Insert Part Number: 88987072
Product Specifications- Other Name: Wiper, Windshield Wiper Blade
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 21.4 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88987072
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Cadillac XLR Insert Part Number: 88987071
Product Specifications- Other Name: Wiper, Windshield Wiper Blade
- Item Weight: 3.10 Pounds
- Item Dimensions: 21.3 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88987071
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Cadillac XLR Wiper Arm
With a comprehensive array of OEM 2007 Cadillac XLR Wiper Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac XLR Wiper Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Cadillac XLR Wiper Arm Parts and Q&A
- Q: How to replace the wiper arm on 2007 Cadillac XLR?A: You must perform the following steps before replacing the Wiper Arm: open the hood, turn to accy ignition position, set the Wiper Switch to delay position. Put the Ignition Switch into off mode when the wiper arms stop their mid-stroke movement. Mark the windshield at each Wiper Blade with masking tape for wiper replacement orientation. Take off the washer hose connection to the air inlet grille and remove the Wiper Arm nut shield as well as the nut. Hold the hinged joint of the Wiper Arm and push it toward the windshield using rocking movements to free it from the wiper shaft before taking out both the Wiper Arm and the Wiper Blade . Install the Wiper Blade onto the Wiper Arm before checking if the wiper transmission shaft and Wiper Arm splines have corrosion. Clean these areas if necessary. Place the Wiper Blade tip against the masking tape marks on the windshield surface before fixing it onto the wiper transmission splined shaft. First fit the Wiper Arm nut on and torque it to 29 n.m (21 lb ft), and then place the Wiper Arm nut cover together with the washer hose back on the air inlet grille panel. Check the wiper movement after undoing the tape from the windshield.
Related 2007 Cadillac XLR Parts
2007 Cadillac XLR Bumper
2007 Cadillac XLR Dash Panel Vent Portion Covers
2007 Cadillac XLR Dash Panels
2007 Cadillac XLR Door Armrest
2007 Cadillac XLR Floor Pan
2007 Cadillac XLR Hood Latch
2007 Cadillac XLR Sunroof Cable
2007 Cadillac XLR Trunk Lid Lift Support
2007 Cadillac XLR Washer Pump
2007 Cadillac XLR Washer Reservoir
2007 Cadillac XLR Windshield Wiper
2007 Cadillac XLR Wiper Blade