How to replace the fuel pressure sensor on 2007 Chevrolet Colorado?

Access to replace the Fuel Tank pressure sensor begins with raising and safely positioning the vehicle to expose the Fuel Tank located through the wheelhouse liner. Users should lower the Fuel Tank when working on crew cab vehicles. Start by taking out the left rear pickup box wheelhouse liner and then disconnect the wiring connector which joins the pressure sensor to the chassis harness. The sensor will be freed from the Fuel Tank module after pulling upward. Installing this sensor requires sensor seal application of clean engine oil that should follow by complete insertion of the sensor into the Fuel Tank module. Reinstall the left pickup box wheelhouse liner after installing its chassis wiring harness electrical connector to the Fuel Tank pressure sensor. Install the Fuel Tank on crew cab vehicles before proceeding with lowering the vehicle.

OEM 2007 Chevrolet Colorado Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2007 Chevrolet Colorado Fuel Pressure Regulator, Passenger Side Part Number: 16238399
$54.17 MSRP: $101.06
You Save: $46.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2007 Chevrolet Colorado Fuel Pressure Sensor

With a comprehensive array of OEM 2007 Chevrolet Colorado Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Colorado Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Colorado Fuel Pressure Sensor Parts and Q&A

Q: How to replace the fuel pressure sensor on 2007 Chevrolet Colorado?
A: Access to replace the Fuel Tank pressure sensor begins with raising and safely positioning the vehicle to expose the Fuel Tank located through the wheelhouse liner. Users should lower the Fuel Tank when working on crew cab vehicles. Start by taking out the left rear pickup box wheelhouse liner and then disconnect the wiring connector which joins the pressure sensor to the chassis harness. The sensor will be freed from the Fuel Tank module after pulling upward. Installing this sensor requires sensor seal application of clean engine oil that should follow by complete insertion of the sensor into the Fuel Tank module. Reinstall the left pickup box wheelhouse liner after installing its chassis wiring harness electrical connector to the Fuel Tank pressure sensor. Install the Fuel Tank on crew cab vehicles before proceeding with lowering the vehicle.