ChevyParts
My Garage
My Account
Cart
OEM 2007 Chevrolet Corvette Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Starter found
2007 Chevrolet Corvette Starter
Part Number: 89017847$357.97 MSRP: $711.58You Save: $353.61 (50%)Ships in 1 Business DayProduct Specifications- Other Name: Starter, Starter Motor
- Item Weight: 10.50 Pounds
- Item Dimensions: 12.7 x 6.8 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89017847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2007 Chevrolet Corvette Starter
With a comprehensive array of OEM 2007 Chevrolet Corvette Starter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Starter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Chevrolet Corvette Starter Parts Questions & Experts Answers
- Q: How to replace the starter motor on 2007 Chevrolet Corvette?A: Start by disconnecting the negative Battery Cable followed by removing the right Catalytic Converter. Begin by unfastening the solenoid's positive Battery Cable nut before removing the positive terminal with its accompanying engine harness leads. First remove the s terminal nut from the solenoid before taking off its purple wire lead and washer. After supporting the Starter motor users should remove the Starter motor bolts to extract the Starter motor. After setting the Starter motor on the block, install Starter motor bolts with a torque of 50 n.m (37 lb ft) until proper tightness is achieved. During installation arrange the purple lead wire to face the 10 o'clock direction. First install the s terminal washer and purple lead wire on the Starter motor before screwing the s terminal nut down to 4 n.m (35 lb in). Note: position the gray and rust harness leads at the 6 o'clock and 7 o'clock points. First install the gray and rust harness leads on the solenoid before adding the positive Battery Cable terminal and securing its nut to 8 n.m (71 lb in). Reinstall the right Catalytic Converter while also performing a negative Battery Cable reconnection.
