How to replace the pushrod and valve rocker arm on 2007 Chevrolet Impala?

The rack should hold valve train components in their correct sequence before replacing valve rocker arms and push rods. Start the procedure by taking off valve Rocker Arm covers and then easing valve Rocker Arm bolts before pulling out rocker arms and pushrods. The intake push rods amount to 147.51 mm (5.81 in) yet exhaust push rods span to 154.87 mm (6.1 in). Another essential step involves applying prelube to pushrods before their installation where blue-stripped exhaust pushrods should reside in the lifter bore and yellow-stripped intake pushrods must occupy the correct position. Distribute prelube material over the surfaces that will experience friction between rocker arms. The procedure of reconditioning a Cylinder Head or its components requires the use of shims (88894006) under the valve Rocker Arm pedestals. First install the rocker arms before tightening the bolts to 34 n.m (25 lb ft). Then move on to install the valve Rocker Arm cover(s).

OEM 2007 Chevrolet Impala Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Pushrods found

View related parts
2007 Chevrolet Impala Push Rods Part Number: 10238852
$18.77 MSRP: $30.90
You Save: $12.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Valve Push; Pushrod; Rod, Engine Valve Push Rod
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.1 x 0.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 16
- SKU: 10238852
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- SS | 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Impala Push Rods Part Number: 12577693
$16.23 MSRP: $25.42
You Save: $9.19 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 0.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577693
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Impala Push Rods Part Number: 12577692
$9.82 MSRP: $15.39
You Save: $5.57 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod, Engine Valve Push Rod; Pushrod
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.6 x 0.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Chevrolet Impala Pushrod

With a comprehensive array of OEM 2007 Chevrolet Impala Pushrod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Impala Pushrod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Impala Pushrod Parts and Q&A

Q: How to replace the pushrod and valve rocker arm on 2007 Chevrolet Impala?
A: The rack should hold valve train components in their correct sequence before replacing valve rocker arms and push rods. Start the procedure by taking off valve Rocker Arm covers and then easing valve Rocker Arm bolts before pulling out rocker arms and pushrods. The intake push rods amount to 147.51 mm (5.81 in) yet exhaust push rods span to 154.87 mm (6.1 in). Another essential step involves applying prelube to pushrods before their installation where blue-stripped exhaust pushrods should reside in the lifter bore and yellow-stripped intake pushrods must occupy the correct position. Distribute prelube material over the surfaces that will experience friction between rocker arms. The procedure of reconditioning a Cylinder Head or its components requires the use of shims (88894006) under the valve Rocker Arm pedestals. First install the rocker arms before tightening the bolts to 34 n.m (25 lb ft). Then move on to install the valve Rocker Arm cover(s).