Make sure this part fits

GM 12577692
Push Rods

2006-2011 GM

Customer Questions & Expert Answers (11)
GM 12577692 Push Rods
GM 12577692 Push Rods
  • Part Description
    Rod, Engine Valve Push Rod; Pushrod
  • Manufacturer
    General Motors
Make sure this part fits
$9.63 MSRP: $15.09
You Save: $5.46 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2011 Buick LucerneCX, CXL, CXL Special Edition6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2011 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2010 Chevrolet MalibuLS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2010 Pontiac G6Base, GT, GTP6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006 Pontiac MontanaSV66 Cyl 3.9 L GAS
    2007-2008 Saturn AuraXE6 Cyl 3.5 L GAS
    2008-2009 Saturn VueXE6 Cyl 3.5 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12577692 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12577692 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the pushrods and valve rocker arm on Buick Lucerne? Posted by Customer
    A:
    When replacing the valve Rocker Arm and push rods it is essential to organize valve train components on a rack in their original configuration. Start the replacement by taking out the valve Rocker Arm covers from the engine. After removing the valve Rocker Arm bolts and extracting the rocker arms you should handle the pushrods that measure 147.51mm (5.81 in) for intake and 154.87mm (6.1 in) for exhaust. Prelube application on Pushrod ends should be followed by proper placement of pushrods within lifter bores. Apply prelube material to every surface that will experience friction through the Rocker Arm installation. The installation of shims (88894006) under the valve Rocker Arm pedestals becomes necessary after any reconditioning process on the Cylinder Head and its components. For the installation process start by putting on rocker arms followed by their bolts before reinstalling the valve Rocker Arm covers.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the valve rocker arm and push rods for the 2010 Buick Lucerne? Posted by Customer
    A:
    Remove the valve rocker arm covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the torque specification for tightening the rocker arm bolts for the 2007 Buick Terraza? Posted by Customer
    A:
    Tighten them to 34 N.m (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the next step after reinstalling the pushrods for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the rocker arms and, following the fastener notice, secure the rocker arm bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What are the measurements for the intake and exhaust push rods for the 2008 Chevrolet Impala? Posted by Customer
    A:
    The intake push rods measure 147.51 mm (5.81 in) and the exhaust push rods measure 154.87 mm (6.1 in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the final step in the process for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Install the valve rocker arm cover(s).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the first step to replace the valve rocker arm and push rods for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Place the valve train components in a rack to maintain their original order.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the next step after tightening the bolts for the first set of cylinders for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Rotate the crankshaft 360 degrees and tighten the valve rocker arm bolts for cylinders 3, 4, 5, and 6 exhaust to 30 Nm (22 ft. lbs.) and for cylinders 2, 6, 7, and 8 intake to 30 Nm (22 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the next step after installing the rocker arms for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Install the rocker arm bolts, tightening them to 34 Nm (25 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    What is the next step after installing the pushrods for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Install the rocker arms and then the rocker arm bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pushrod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Push Rods 12577692 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12577692 Push Rods is available in the market under the name GM Pushrod. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12577692 Push Rods fits certain Chevrolet Malibu, Impala, Monte Carlo models, as well as Buick Lucerne, Terraza. Additionally, it is compatible with Pontiac G6, Montana and Saturn Vue, Aura models.
The original GM component designated by manufacturer part number 12577692 maintains top performance when functioning as the Rod, Engine Valve Push Rod; Pushrod unit. The component 12577692 is constructed from durable material and its dimensions span 6.6 x 0.8 x 0.4 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12577692 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.