OEM 2007 Chevrolet Impala Rocker Shaft Spring Kit

2007 Chevrolet Impala Rocker Shaft Spring Kit Parts Questions & Experts Answers

• Q: How to replace the Rocker Shaft Spring Kit and valve stem oil seal on 2007 Chevrolet Impala?

  A: Proceed with Valve Stem Oil Seal and valve spring replacement when you place the working cylinder Piston at tdc to avoid valve damage. Take out the Spark Plug first by unwinding its nut and then clean the Spark Plug hole of all particles. Insert the Spark Plug port adapter j 22794 into the Spark Plug port while air keeps the valve in position during the process. Use the valve spring compressor tool parts j 5892-d and en-47823 to carefully press the valve spring down. You should take off valve spring cap keys, valve cap, valve spring, and Valve Stem Oil Seal after the compressing process. Place clean engine oil on the valve stem and put the right Valve Stem Oil Seal in place (black seal for intake valve and brown seal for exhaust). Push the valve spring into position using the j 5892-d compressor and work with en-47823. Put in the valve cap keys while applying grease when needed to keep them stable at their correct positions. Take the breathing air and j 22794 tools out of the Spark Plug passage before you put back the Rocker Arm and Spark Plug.