OEM 2007 Chevrolet Impala Transmission Oil Cooler

2007 Chevrolet Impala Transmission Oil Cooler Parts Questions & Experts Answers

• Q: How to replace the Transmission Oil Cooler on 2007 Chevrolet Impala?

  A: Start by ensuring enough space exists between transaxle oil cooler pipes and hoses to stop damage or fluid leakage. You need to start by pulling out the upper radiator air baffle followed by unbolting the auxiliary transaxle oil cooler from the upper radiator support. Start by removing the lower radiator air baffle followed by removing auxiliary transaxle oil cooler bolts from the lower radiator support. Disconnect the inlet and outlet auxiliary Transmission Oil Cooler lines from their clips on the support structure and drop the auxiliary transaxle oil cooler down below the front bumper. Remove auxiliary transaxle cooler hoses from inlet and outlet ports before extracting the oil coolant unit from its location. To put the cooler back into the vehicle first connect the inlet and outlet auxiliary transaxle oil cooler hoses to the cooler before installation. Secure both inlet and outlet auxiliary Transmission Oil Cooler lines to their storage clips while paying attention to the fastener notice. Tighten the auxiliary transaxle oil cooler bolts at lower radiator support to 10 n.m (89 lb in) before reinstalling the lower radiator air baffle. Last, drive the auxiliary transaxle oil cooler bolt into the upper radiator support using 25 n.m (18 lb ft) of torque before installing the upper radiator air baffle and adjusting the fluid level.