How to replace the front disc brake pads on the 25/3500 Series on 2007 Chevrolet Silverado 3500 Classic?

The first step to replace front disc brake pads on 25/3500 series is to inspect brake master cylinder reservoir fluid levels. If the fluid sits midway between highest and lowest marks, no drainage is needed. Put on the c-clamps over the top of the caliper housing and press it down against the rear pad to retract the brake caliper pistons fully. Keep the brake pedal in its relaxed position when you unbolt the caliper to prevent any component damage. Set the brake caliper onto mechanic's wire without unplugging the hydraulic brake hose and remove the brake pads plus their anti-rattle clips to examine the caliper and caliper bracket. First install new anti-rattle clips onto the caliper bracket then put disc brake pads (2500 Series needs both inner and outer pads) before connecting the caliper bracket. Put back the tire and wheel system after installing brake caliper bolts with a torque value of 108 nm (80 ft. Lbs.) when the vehicle is lowered. To properly seat brake caliper pistons and pads first turn off engine then slowly press the brake pedal one-third at its length before releasing it. Perform this step several times until brake pedal stops moving. Put brake fluid into the master cylinder reservoir as needed and use the disc sanding tool to smooth the pad surfaces.

OEM 2007 Chevrolet Silverado 3500 Classic Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Pads found

View related parts
2007 Chevrolet Silverado 3500 Classic Brake Pads, Front
Part Number: 19432941
$131.12 MSRP: $277.15
You Save: $146.03 (53%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 15886468, 18048600, 18044594, 88950732, 18026219, 19210706, 25924485, 88964201, 84292732
- Item Weight: 15.20 Pounds
- Condition: New
- SKU: 19432941
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Brake Pads, Front
Part Number: 18048101
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads; Pad Kit, Brake
- Position: Front
- Item Weight: 5.90 Pounds
- Item Dimensions: 9.1 x 4.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18048101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Brake Pads, Front
Part Number: 19133306
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18042334
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.3 x 5.2 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Brake Pads
Part Number: 19133307
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 18044346
- Item Weight: 5.90 Pounds
- Item Dimensions: 9.6 x 5.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133307
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2007 Chevrolet Silverado 3500 Classic Brake Pads
Part Number: 19210705
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads
- Position: Rear
- Replaces: 18041762, 18026217
- Item Weight: 6.10 Pounds
- Item Dimensions: 10.1 x 4.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19210705
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 3500 Classic Submodels:
- LS, LT, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

2007 Chevrolet Silverado 3500 Classic Brake Pad

With a comprehensive array of OEM 2007 Chevrolet Silverado 3500 Classic Brake Pad, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 3500 Classic Brake Pad are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Silverado 3500 Classic Brake Pad Parts Questions & Experts Answers

Q: How to replace the front disc brake pads on the 25/3500 Series on 2007 Chevrolet Silverado 3500 Classic?
A: The first step to replace front disc brake pads on 25/3500 series is to inspect brake master cylinder reservoir fluid levels. If the fluid sits midway between highest and lowest marks, no drainage is needed. Put on the c-clamps over the top of the caliper housing and press it down against the rear pad to retract the brake caliper pistons fully. Keep the brake pedal in its relaxed position when you unbolt the caliper to prevent any component damage. Set the brake caliper onto mechanic's wire without unplugging the hydraulic brake hose and remove the brake pads plus their anti-rattle clips to examine the caliper and caliper bracket. First install new anti-rattle clips onto the caliper bracket then put disc brake pads (2500 Series needs both inner and outer pads) before connecting the caliper bracket. Put back the tire and wheel system after installing brake caliper bolts with a torque value of 108 nm (80 ft. Lbs.) when the vehicle is lowered. To properly seat brake caliper pistons and pads first turn off engine then slowly press the brake pedal one-third at its length before releasing it. Perform this step several times until brake pedal stops moving. Put brake fluid into the master cylinder reservoir as needed and use the disc sanding tool to smooth the pad surfaces.