OEM 2007 GMC Canyon Transfer Case Seal

2007 GMC Canyon Transfer Case Seal Parts Questions & Experts Answers

• Q: How to replace the input transfer case seal on 2007 GMC Canyon?

  A: The first step to replace the Transfer Case input shaft seal begins with removing the Transfer Case assembly. The assembly fixture (J 45759) should be bolted to the Transfer Case using four suitable bolts before using the holding fixture (J 3289-20) on a sturdy workbench for mounting. The assembly fixture (J 45759) with Transfer Case goes inside the holding fixture (J 3289-20) with a secure pivot pin installation. The input shaft seal on the Transfer Case can be removed through the combination of the seal remover (J 45278) under the seal and the slide hammer with bearing adapter (J 23907) alongside the seal remover (J 45278). The input seal installer (J 45934) needs to be used with a hammer to install a new input shaft seal into the Transfer Case until it reaches the correct depth. Last, reinstall the Transfer Case assembly after removing the assembly fixture (J 45759) from the part.