How to replace the front output transfer case seal on GMC Canyon?

You must drain the transfer case fluid before starting the replacement of the front output shaft seal. Bend the staked regions on the yoke flange nut out completely before removing the front propeller shaft. A suitable punch bends the stakes out on the yoke flange nut before you use the flange and pulley holding tool (J 8614-01) to support the flange while you loosen the yoke flange nut. Start by removing the yoke flange nut, subsequent o-ring seal and front output yoke flange structure while discarding both components. A flat-bladed screwdriver should be used to slightly tap the edge of the front output shaft seal until it detaches from the transfer case. The front output shaft seal installer (J 37212) combined with a hammer enables correct installation of the new front output shaft seal within the transfer case. Start by placing the front output shaft under the yoke flange. Next, apply transfer case fluid to the new yoke flange o-ring seal followed by both components installation with the new nut. Use the flange and pulley holding tool (J 8614-01) to secure the yoke flange before torquing the yoke flange nut to 137 n.m (101 lb ft). You should stake the yoke flange nut through two points using a suitable punch for the installation of the front propeller shaft. Fill transfer case fluid as the next step before ending the process.

OEM GMC Canyon Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Transfer Case Seals found

View related parts
GMC Canyon Adapter Gasket
Part Number: 24245110
$8.59 MSRP: $13.45
You Save: $4.86 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gasket-Transfer Case Adapter; Transfer Case Adapter Seal
- Replaced by: 86816628
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Extension Seal
Part Number: 97238997
$19.00 MSRP: $29.75
You Save: $10.75 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Rear Output Shaft; Transfer Case Gasket; Seal, Transfer Case
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Output Shaft Seal, Rear
Part Number: 24233898
$38.27 MSRP: $59.95
You Save: $21.68 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Output Shaft Seal; Transfer Case Gasket.; Ext. Housing Seal; Trans. Planet Carrier, Univ. Joint Yoke, Interm. Trans. Case, Trans. Ext., Trans. Case
- Position: Rear
- Replaces: 19133150, 24207336
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2023 GMC Canyon | All Terrain, AT4, AT4X, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Extension Housing Seal
Part Number: 24228876
$28.74 MSRP: $45.03
You Save: $16.29 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transmission Input And Turbine Shaft; Automatic Transmission Extension Housing Seal; Transmission Seal; Seal, Universal Joint Sleeve Yoke
- Replaces: 24238075
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Input Shaft Seal
Part Number: 19299084
$17.37 MSRP: $27.21
You Save: $9.84 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Input Shaft; Automatic Transmission Input Shaft Seal.; Seal, Intermediate Transfer Case; Seal, Transfer Case
- Replaces: 19133156
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2023 GMC Canyon | All Terrain, AT4, AT4X, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Output Shaft Seal, Front
Part Number: 84368195
$8.49 MSRP: $13.29
You Save: $4.80 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal-Transfer Case Front Output Shaft; Automatic Transmission Transfer Shaft Seals; Transfer Case Output Shaft Seal; Seal, Intermediate Transfer Case; Seal, Transfer Case
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS

GMC Canyon Transfer Case Seal

Our website offers an extensive catalog of genuine GMC Canyon Transfer Case Seal at unbeatable prices. Every OEM GMC Canyon Transfer Case Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Canyon Transfer Case Seal Parts Questions & Experts Answers

Extension Seal
97238997
Q: How to replace the front output transfer case seal on GMC Canyon?
A: You must drain the transfer case fluid before starting the replacement of the front output shaft seal. Bend the staked regions on the yoke flange nut out completely before removing the front propeller shaft. A suitable punch bends the stakes out on the yoke flange nut before you use the flange and pulley holding tool (J 8614-01) to support the flange while you loosen the yoke flange nut. Start by removing the yoke flange nut, subsequent o-ring seal and front output yoke flange structure while discarding both components. A flat-bladed screwdriver should be used to slightly tap the edge of the front output shaft seal until it detaches from the transfer case. The front output shaft seal installer (J 37212) combined with a hammer enables correct installation of the new front output shaft seal within the transfer case. Start by placing the front output shaft under the yoke flange. Next, apply transfer case fluid to the new yoke flange o-ring seal followed by both components installation with the new nut. Use the flange and pulley holding tool (J 8614-01) to secure the yoke flange before torquing the yoke flange nut to 137 n.m (101 lb ft). You should stake the yoke flange nut through two points using a suitable punch for the installation of the front propeller shaft. Fill transfer case fluid as the next step before ending the process.