Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 GMC Canyon Transfer Case Seal

Transfer Case Output Shaft Seal
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transfer Case Seal found

  • 2008 GMC Canyon Transfer Case Seal - 97238997
    2008 GMC Canyon Transfer Case Seal - 97238997
    2008 GMC Canyon Transfer Case Seal Diagram - 97238997
    View related parts

    2008 GMC Canyon Extension Seal Part Number: 97238997

    $18.06 MSRP: $29.75
    You Save: $11.69 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal, Transfer Case Rear Output Shaft; Transfer Case Gasket; Seal, Transfer Case
    • Position: Rear
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 5.6 x 4.1 x 0.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 97238997
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 GMC Canyon Submodels:
    • SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Canyon Transfer Case Seal

With a comprehensive array of OEM 2008 GMC Canyon Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Canyon Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Canyon Transfer Case Seal Parts and Q&A

  • Q: How to replace the input shaft transfer case seal on 2008 GMC Canyon?
    A: The first step to replace the input shaft seal requires complete removal of the Transfer Case assembly. The assembly fixture (J 45759) requires installation onto the Transfer Case through four appropriate bolts. Secure the input component within the holding fixture (J 3289-20) by integrating the assembly fixture (J 45759) into the holding fixture workbench using the pivot pin. There exists no protective shoulder for the seal inside the Transfer Case so employ the seal remover tool (J 45278) to pull out the seal properly. The input shaft seal removal from the Transfer Case requires the slide hammer with bearing adapter (J 23907) together with the seal remover (J 45278) according to service procedure. The input seal installer (J 45934) with a hammer assists installation of the new input shaft seal inside the Transfer Case until reaching its accurate depth positioning. Curve the assembly fixture (J 45759) from the Transfer Case before reinstalling the complete Transfer Case assembly.

Related 2008 GMC Canyon Parts

Alternate Year Models

+
2007 GMC Canyon Transfer Case Seal 2009 GMC Canyon Transfer Case Seal