How to service and repair the Steering Angle Sensor on 2007 GMC Savana 3500?

Disable the SIR system. Keep wheels straight and column locked before disconnecting the steering shaft to avoid misalignment. Lock the column with the anti-rotation pin. If reusing the sensor, insert a centering pin; otherwise discard it. Remove column, connector, retainer, and sensor, then install, gap, reconnect, remove pins, and re-enable SIR.

OEM 2007 GMC Savana 3500 Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2007 GMC Savana 3500 Angle Sensor Part Number: 26109034
$130.37 MSRP: $255.23
You Save: $124.86 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 6.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26109034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Savana 3500 Submodels:
- Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2007 GMC Savana 3500 Steering Angle Sensor

With a comprehensive array of OEM 2007 GMC Savana 3500 Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Savana 3500 Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Savana 3500 Steering Angle Sensor Parts and Q&A

Q: How to service and repair the Steering Angle Sensor on 2007 GMC Savana 3500?
A: Disable the SIR system. Keep wheels straight and column locked before disconnecting the steering shaft to avoid misalignment. Lock the column with the anti-rotation pin. If reusing the sensor, insert a centering pin; otherwise discard it. Remove column, connector, retainer, and sensor, then install, gap, reconnect, remove pins, and re-enable SIR.