How to replace the front side door window regulator on 2008 Buick LaCrosse?

The initial step to switch the front side door Window Regulator begins with disconnecting the Power Window Switch to avoid express up/down feature injuries. The front door trim panel and front door water deflector should be removed after applying masking tape to the outer trim. To reach the window guide retainer clip you must rise the window high enough after which you should push the clip's locks inside to enable releasing the window. Secure the window at its highest point while disconnecting the power Window Motor connector and taking out the Window Regulator motor bolt together with the nuts numbered two and four that hold the Window Regulator studs. The Window Regulator and motor need to be extracted from the inner door panel access opening before disconnecting the power Window Motor from the Window Regulator. To install the power Window Motor combine it with the Window Regulator then pass them through the access opening until all three securely join with nuts (2, 4) and Window Regulator motor bolts to a torque setting of 10 n.m (89 lb in). The power Window Motor connector can be reattached after which all tape is removed and the window is sealed into position with the stopper. Conclude the window check by verifying correct operation after programming and reinstall the front door water deflector before putting back the front door trim panel.

OEM 2008 Buick LaCrosse Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2008 Buick LaCrosse Window Regulator, Rear Driver Side
Part Number: 25980396
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator
- Position: Rear Driver Side
- Replaces: 15234008, 15880669, 25788627, 25856541, 25956521, 10377528, 15242091
- Item Weight: 2.60 Pounds
- Item Dimensions: 25.9 x 13.0 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25980396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Window Regulator, Rear Passenger Side
Part Number: 25980397
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator
- Position: Rear Passenger Side
- Replaces: 10377529, 15234007, 15880670, 25856542, 25788628, 25852490, 25956522, 15242092
- Item Weight: 2.50 Pounds
- Item Dimensions: 26.1 x 12.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25980397
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Window Regulator, Front Passenger Side
Part Number: 25980395
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door Lock Remote Control
- Position: Front Passenger Side
- Replaces: 15234010, 15880668, 25956520, 15146541, 25856540
- Item Weight: 3.00 Pounds
- Item Dimensions: 5.1 x 26.3 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25980395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Buick LaCrosse Window Regulator, Front Driver Side
Part Number: 25980394
Product Specifications
- Other Name: Regulator, Front Door Window Regulator; Regulator, Door Lock Remote Control
- Position: Front Driver Side
- Replaces: 15146542, 15234009, 15880667, 25956519, 25856539
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.1 x 26.5 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25980394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick LaCrosse Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS

2008 Buick LaCrosse Window Regulator

With a comprehensive array of OEM 2008 Buick LaCrosse Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick LaCrosse Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick LaCrosse Parts Questions & Experts Answers

Q: How to replace the front side door window regulator on 2008 Buick LaCrosse?
A: The initial step to switch the front side door Window Regulator begins with disconnecting the Power Window Switch to avoid express up/down feature injuries. The front door trim panel and front door water deflector should be removed after applying masking tape to the outer trim. To reach the window guide retainer clip you must rise the window high enough after which you should push the clip's locks inside to enable releasing the window. Secure the window at its highest point while disconnecting the power Window Motor connector and taking out the Window Regulator motor bolt together with the nuts numbered two and four that hold the Window Regulator studs. The Window Regulator and motor need to be extracted from the inner door panel access opening before disconnecting the power Window Motor from the Window Regulator. To install the power Window Motor combine it with the Window Regulator then pass them through the access opening until all three securely join with nuts (2, 4) and Window Regulator motor bolts to a torque setting of 10 n.m (89 lb in). The power Window Motor connector can be reattached after which all tape is removed and the window is sealed into position with the stopper. Conclude the window check by verifying correct operation after programming and reinstall the front door water deflector before putting back the front door trim panel.