How to replace the water pump (L26/3.8L) on 2008 Buick Lucerne?

As the first step to install a new Water Pump for l26 or 3.8l engines you must drain the cooling system. You need to loosen the Water Pump Pulley bolts first to remove its Drive Belt. Unfasten both Water Pump Pulley bolts and detach the pulley from its position. First remove the bolts of Water Pump and relocate the Power Steering Pump. Then take out Water Pump bolts and complete the pump removal with its gasket. Check for damage on the Water Pump contact areas. After placing the new gasket, put in the Water Pump and tighten its bolts to 15 n.m (11 lb ft) and an additional 80 degrees based on readings from the j 45059 angle meter. Move the Power Steering Pump to its slot and fasten its bolts to 34 n.m (25 lb ft). Secure the Water Pump Pulley bolts loosely before putting on the Drive Belt. Conclude by bolting the Water Pump Pulley to 13 n.m with a torque of 115 pound inches then refill the cooling system.

OEM 2008 Buick Lucerne Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Water Pumps found

View related parts
2008 Buick Lucerne Water Pump
Part Number: 12583033
$173.36 MSRP: $339.42
You Save: $166.06 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.8 x 6.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12583033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
2008 Buick Lucerne Water Pump
Part Number: 19209288
$128.02 MSRP: $250.62
You Save: $122.60 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Fan Blade; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaces: 89017813, 89060462, 12482903, 12537829, 89018214
- Item Weight: 3.20 Pounds
- Item Dimensions: 11.4 x 7.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209288
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Buick Lucerne Submodels:
- CX, CXL | 6 Cyl 3.8 L GAS

2008 Buick Lucerne Water Pump

With a comprehensive array of OEM 2008 Buick Lucerne Water Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Lucerne Water Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Lucerne Water Pump Parts Questions & Experts Answers

Q: How to replace the water pump (L26/3.8L) on 2008 Buick Lucerne?
A: As the first step to install a new Water Pump for l26 or 3.8l engines you must drain the cooling system. You need to loosen the Water Pump Pulley bolts first to remove its Drive Belt. Unfasten both Water Pump Pulley bolts and detach the pulley from its position. First remove the bolts of Water Pump and relocate the Power Steering Pump. Then take out Water Pump bolts and complete the pump removal with its gasket. Check for damage on the Water Pump contact areas. After placing the new gasket, put in the Water Pump and tighten its bolts to 15 n.m (11 lb ft) and an additional 80 degrees based on readings from the j 45059 angle meter. Move the Power Steering Pump to its slot and fasten its bolts to 34 n.m (25 lb ft). Secure the Water Pump Pulley bolts loosely before putting on the Drive Belt. Conclude by bolting the Water Pump Pulley to 13 n.m with a torque of 115 pound inches then refill the cooling system.