How to replace the rear Parking Assist Distance Sensor on 2008 Cadillac SRX?

Start the rear object sensor replacement by taking off the rear bumper fascia. You should start by detaching the electrical connector from the rear object sensor. You can remove the rear object sensor by lifting its locking tabs on the housing. Place the new sensor inside the housing then connect its electrical connector to the rear object sensor. Complete the process by putting back the rear bumper fascia.

OEM 2008 Cadillac SRX Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Assist Distance Sensor found

View related parts
2008 Cadillac SRX Reverse Sensor
Part Number: 19116421
Product Specifications
- Other Name: Sensor, Theft Deterrent Or Front/Rear/Side Object; Parking Sensors; Sensor; Sensor Kit,Theft Deterrent Or Front/Rear/Side/Intake Object; Sensor Kit, Front And Rear Bumper/Fascia Face
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19116421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac SRX Parking Assist Distance Sensor

With a comprehensive array of OEM 2008 Cadillac SRX Parking Assist Distance Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX Parking Assist Distance Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the rear Parking Assist Distance Sensor on 2008 Cadillac SRX?
A: Start the rear object sensor replacement by taking off the rear bumper fascia. You should start by detaching the electrical connector from the rear object sensor. You can remove the rear object sensor by lifting its locking tabs on the housing. Place the new sensor inside the housing then connect its electrical connector to the rear object sensor. Complete the process by putting back the rear bumper fascia.