How to replace the lash adjusters on the right side on 2008 Cadillac STS?

To take out the right side lash adjusters, start by pulling out the correct camshafts (LP1, LY7) and (LLT). After that, you must take off the rocker arms. After that, remove the adjusters. Look over and clean the camshafts, rocker arms, and adjusters, making any repairs or replacements that are needed. The first step for installation is to install the adjusters, then fit the rocker arms. Afterward, put the lp1, ly7, and llt camshafts back in their proper positions.

OEM 2008 Cadillac STS Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2008 Cadillac STS Valve Lifters, Green Line
Part Number: 12686787
$14.06 MSRP: $23.17
You Save: $9.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac STS Lash Adjuster

With a comprehensive array of OEM 2008 Cadillac STS Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac STS Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the lash adjusters on the right side on 2008 Cadillac STS?
A: To take out the right side lash adjusters, start by pulling out the correct camshafts (LP1, LY7) and (LLT). After that, you must take off the rocker arms. After that, remove the adjusters. Look over and clean the camshafts, rocker arms, and adjusters, making any repairs or replacements that are needed. The first step for installation is to install the adjusters, then fit the rocker arms. Afterward, put the lp1, ly7, and llt camshafts back in their proper positions.