How to replace the lash adjuster on the right side on 2009 Cadillac STS?

Installation of right side lash adjusters requires first removal of applicable camshafts (LP1, LY7) and (LLT). As a next step remove all rocker arms from the setup. After that, remove the adjusters. First clean all components before inspecting camshafts rocker arms and adjusters and replace or fix any defective parts. The process starts by installing adjusters then continuing with the installation of rocker arms. The replacement sequence ends with the camshafts (LP1, LY7) and (LLT).

OEM 2009 Cadillac STS Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2009 Cadillac STS Valve Lifters, Green Line
Part Number: 12686787
$14.06 MSRP: $23.17
You Save: $9.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2009 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac STS Lash Adjuster

With a comprehensive array of OEM 2009 Cadillac STS Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac STS Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the lash adjuster on the right side on 2009 Cadillac STS?
A: Installation of right side lash adjusters requires first removal of applicable camshafts (LP1, LY7) and (LLT). As a next step remove all rocker arms from the setup. After that, remove the adjusters. First clean all components before inspecting camshafts rocker arms and adjusters and replace or fix any defective parts. The process starts by installing adjusters then continuing with the installation of rocker arms. The replacement sequence ends with the camshafts (LP1, LY7) and (LLT).