How to replace the Front Exhaust Pipe on 2008 Chevrolet Aveo?

The front pipe replacement starts by removing the rear heated Oxygen Sensor before you can access the connecting pipe mounting bracket bolt at the next step. Finally you will need to separate the connecting pipe nuts along with its gasket from the Catalytic Converter. Clean the seal surfaces by removing all nuts that connect between the front muffler pipe and the connecting pipe. Identify any holes or damage as well as open streams or deterioration zones that might permit exhaust fumes to infiltrate the passenger space on the connecting pipe. The Catalytic Converter and connecting pipe with gasket need to connect to the front muffler pipe flange then tighten the nuts to 30 n.m (22 lb ft). Fasten the connecting pipe to the Catalytic Converter by applying nuts and the gasket and tighten these nuts until they reach 40 n.m (30 lb ft). Thank your installation process ends with installing the front Exhaust Pipe mounting bracket bolt at 40 n.m (30 lb ft) torque and reinstallation of the rear heated Oxygen Sensor held with 41 n.m (30 lb ft) torque.

OEM 2008 Chevrolet Aveo Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Pipes found

View related parts
2008 Chevrolet Aveo Resonator & Pipe Part Number: 96536945
$64.15 MSRP: $95.49
You Save: $31.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler
- Item Weight: 23.30 Pounds
- Item Dimensions: 72.1 x 22.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96536945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Front Pipe Part Number: 96837651
Product Specifications
- Other Name: Pipe, Exhaust Front; Exhaust Pipe; Pipe, Exhaust Pipe
- Position: Front
- Replaces: 96536980
- Item Weight: 11.40 Pounds
- Item Dimensions: 34.7 x 25.2 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96837651
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Muffler Part Number: 96654183
Product Specifications
- Other Name: Muffler, Exhaust Muffler/Resonator; Muffler, Exhaust
- Position: Rear
- Item Weight: 18.20 Pounds
- Item Dimensions: 48.0 x 9.6 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96654183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2008 Chevrolet Aveo Front Pipe Part Number: 96837652
Product Specifications
- Other Name: Pipe, Exhaust Front; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Pipe, Exhaust Pipe
- Position: Front
- Replaces: 96536952
- Item Weight: 9.20 Pounds
- Item Dimensions: 49.0 x 10.3 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96837652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Exhaust Pipe

With a comprehensive array of OEM 2008 Chevrolet Aveo Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Exhaust Pipe Parts and Q&A

Q: How to replace the Front Exhaust Pipe on 2008 Chevrolet Aveo?
A: The front pipe replacement starts by removing the rear heated Oxygen Sensor before you can access the connecting pipe mounting bracket bolt at the next step. Finally you will need to separate the connecting pipe nuts along with its gasket from the Catalytic Converter. Clean the seal surfaces by removing all nuts that connect between the front muffler pipe and the connecting pipe. Identify any holes or damage as well as open streams or deterioration zones that might permit exhaust fumes to infiltrate the passenger space on the connecting pipe. The Catalytic Converter and connecting pipe with gasket need to connect to the front muffler pipe flange then tighten the nuts to 30 n.m (22 lb ft). Fasten the connecting pipe to the Catalytic Converter by applying nuts and the gasket and tighten these nuts until they reach 40 n.m (30 lb ft). Thank your installation process ends with installing the front Exhaust Pipe mounting bracket bolt at 40 n.m (30 lb ft) torque and reinstallation of the rear heated Oxygen Sensor held with 41 n.m (30 lb ft) torque.