How to replace the front sway bar link on 2008 Chevrolet Aveo?

A mechanic must lift the vehicle before installing the sway bar link by suspending the front suspension openings. Start by removing the front wheel after which you should disconnect the sway bar-to-knuckle and bar-to-link fasteners. The sway bar becomes disconnected from the knuckle by removing its sway bar link assembly. After lifting and suspending the vehicle secure the sway bar through its knuckle and link attachments before tightening sway bar link nuts to 50 N.m (37 lb ft). To finish the job you need to install the front wheel again and lower the vehicle to the ground.

OEM 2008 Chevrolet Aveo Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

View related parts
2008 Chevrolet Aveo Stabilizer Link
Part Number: 95994977
$38.46 MSRP: $68.69
You Save: $30.23 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link
- Position: Front
- Replaces: 96391875
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.2 x 4.5 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95994977
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Sway Bar Link

With a comprehensive array of OEM 2008 Chevrolet Aveo Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Sway Bar Link Parts Questions & Experts Answers

Q: How to replace the front sway bar link on 2008 Chevrolet Aveo?
A: A mechanic must lift the vehicle before installing the sway bar link by suspending the front suspension openings. Start by removing the front wheel after which you should disconnect the sway bar-to-knuckle and bar-to-link fasteners. The sway bar becomes disconnected from the knuckle by removing its sway bar link assembly. After lifting and suspending the vehicle secure the sway bar through its knuckle and link attachments before tightening sway bar link nuts to 50 N.m (37 lb ft). To finish the job you need to install the front wheel again and lower the vehicle to the ground.