How to replace the lower control arm ball joint on 2008 Chevrolet Aveo?

Raise the vehicle and put jackstands under the frame, then lower it a little so it balances on the frame and not the control arms. Remove the wheel at first and afterwards take off the Control Arm. Then, take away the Ball Joint mounting screws and nuts. Attach the Ball Joint to the Control Arm with the mounting bolts, and make sure the nuts are installed on the bottom of the arm, then tighten them to 150 n.m (111 lb ft). After putting the Control Arm and wheel in place, take away the jackstands and lower the entire car to the ground.

OEM 2008 Chevrolet Aveo Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2008 Chevrolet Aveo Lower Ball Joint
Part Number: 96535089
$54.16 MSRP: $84.86
You Save: $30.70 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Joint, Front Wheel Lower Control Arm
- Position: Front Lower
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.4 x 3.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 96535089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2008 Chevrolet Aveo Ball Joint

With a comprehensive array of OEM 2008 Chevrolet Aveo Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Aveo Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Aveo Ball Joint Parts Questions & Experts Answers

Q: How to replace the lower control arm ball joint on 2008 Chevrolet Aveo?
A: Raise the vehicle and put jackstands under the frame, then lower it a little so it balances on the frame and not the control arms. Remove the wheel at first and afterwards take off the Control Arm. Then, take away the Ball Joint mounting screws and nuts. Attach the Ball Joint to the Control Arm with the mounting bolts, and make sure the nuts are installed on the bottom of the arm, then tighten them to 150 n.m (111 lb ft). After putting the Control Arm and wheel in place, take away the jackstands and lower the entire car to the ground.