How to replace the lower control arm ball joint on Chevrolet Aveo?

To change the lower Control Arm Ball Joint, first jack up the car and put jackstands under the frame, then lower it a little so it sits on the frame rather than the control arms. Take off the wheel before you remove the Control Arm. At this point, take off the Ball Joint mounting nuts and bolts. Assemble the Ball Joint by putting the mounting bolts through it and the Control Arm, then put the nuts on the underside and tighten them to 150 nm (111 lb ft). Put the Control Arm and the wheel back, then take out the jackstands and lower the vehicle.

OEM Chevrolet Aveo Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
Chevrolet Aveo Lower Ball Joint
Part Number: 96535089
$34.77 MSRP: $84.86
You Save: $50.09 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Joint, Front Wheel Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2011 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

Chevrolet Aveo Ball Joint

Our website offers an extensive catalog of genuine Chevrolet Aveo Ball Joint at unbeatable prices. Every OEM Chevrolet Aveo Ball Joint comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Aveo Ball Joint Parts Questions & Experts Answers

Lower Ball Joint
96535089
Q: How to replace the lower control arm ball joint on Chevrolet Aveo?
A: To change the lower Control Arm Ball Joint, first jack up the car and put jackstands under the frame, then lower it a little so it sits on the frame rather than the control arms. Take off the wheel before you remove the Control Arm. At this point, take off the Ball Joint mounting nuts and bolts. Assemble the Ball Joint by putting the mounting bolts through it and the Control Arm, then put the nuts on the underside and tighten them to 150 nm (111 lb ft). Put the Control Arm and the wheel back, then take out the jackstands and lower the vehicle.