How to replace the lower ball joint on 2004 Chevrolet Aveo?

To replace the lower Ball Joint, first raise and support the vehicle, make sure weight is resting on the jackstands under the frame and not on the control arms. Take out the wheel, then remove the Control Arm and the ball-joint mounting bolts. To assemble, attach the Ball Joint onto the Control Arm and fix with mounting bolts with nuts for underneath the Control Arm and tighten the Ball Joint-to-Control Arm nuts at 64 nm (47 ft. Lbs). After that, re-install Control Arm, mount the front wheel and lower the vehicle.

OEM 2004 Chevrolet Aveo Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2004 Chevrolet Aveo Lower Ball Joint
Part Number: 96535089
$54.16 MSRP: $84.86
You Save: $30.70 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Joint, Front Wheel Lower Control Arm
- Position: Front Lower
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.4 x 3.5 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 96535089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Ball Joint

With a comprehensive array of OEM 2004 Chevrolet Aveo Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Ball Joint Parts Questions & Experts Answers

Q: How to replace the lower ball joint on 2004 Chevrolet Aveo?
A: To replace the lower Ball Joint, first raise and support the vehicle, make sure weight is resting on the jackstands under the frame and not on the control arms. Take out the wheel, then remove the Control Arm and the ball-joint mounting bolts. To assemble, attach the Ball Joint onto the Control Arm and fix with mounting bolts with nuts for underneath the Control Arm and tighten the Ball Joint-to-Control Arm nuts at 64 nm (47 ft. Lbs). After that, re-install Control Arm, mount the front wheel and lower the vehicle.