How to replace the antenna cable on 2008 Chevrolet Colorado?

To change the Antenna Cable, one has to remove right front door sill plate, right hinge pillar trim panel, and instrument panel (I/P) compartment door. Pull the radio Antenna Cable free from the extension cable and disconnect the grommet from the hinge pillar in an outbound direction. Connect a mechanics wire to the Antenna Cable, and then take the Antenna mast off along with the screws holding the Antenna Base. Remove the grommet and cable from the routing hole, remove the Antenna Cable from the veh, leaving the mechanice's wire to thread as a assemblying signal. For an installation, connect the mechanics wire to the end of the Antenna Cable and pull it for routing the cable and the grommet through the hinge pillar. Mount the screws that hold the Antenna Base and tighten them at 7.5 n.m (66 lb in). Then mount the Antenna mast. Unmount the Antenna extension cables nut from the Antenna Cable , unmount the end of the Antenna Cable from the front end of the Antenna extension cable, strip 2 inches of the Antenna extension cable , distribute marker on the wire , attach the mechanics wire on the Antenna Cable , crimp on 2 nuts and double lock the nuts , install the grommet to the hinge pillar , connect the radio Antenna Cable to the extension cable. Lastly, when assembling the light switch panel, the battery, and head lamp and taillamp assembly, install i/p compartment door, right hinge pillar trim panel, and right front door sill plate for the right door.

OEM 2008 Chevrolet Colorado Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Antenna Cables found

View related parts
2008 Chevrolet Colorado Harness
Part Number: 25967014
$70.37 MSRP: $127.35
You Save: $56.98 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Radio Antenna
- Replaces: 15107800, 15834698
- Item Weight: 0.40 Pounds
- Item Dimensions: 13.3 x 13.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25967014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Cable
Part Number: 20929430
$51.85 MSRP: $97.40
You Save: $45.55 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Mobile Telephone Antenna
- Replaces: 15859661, 25860400
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.1 x 12.2 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20929430
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Cable
Part Number: 25860403
$47.47 MSRP: $89.15
You Save: $41.68 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 15859663
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.7 x 13.2 x 3.4 inches
- Condition: New
- SKU: 25860403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Cable
Part Number: 15791898
$34.15 MSRP: $60.98
You Save: $26.83 (44%)
Product Specifications
- Other Name: Cable, Radio Antenna
- Replaces: 15222896
- Item Weight: 0.90 Pounds
- Item Dimensions: 14.2 x 13.9 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15791898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Colorado Antenna Cable
Part Number: 97246052
Product Specifications
- Other Name: Cable Assembly-Radio Antenna; Cable; Cable, Radio Antenna
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.2 x 6.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97246052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Colorado Antenna Cable

With a comprehensive array of OEM 2008 Chevrolet Colorado Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Antenna Cable Parts Questions & Experts Answers

Q: How to replace the antenna cable on 2008 Chevrolet Colorado?
A: To change the Antenna Cable, one has to remove right front door sill plate, right hinge pillar trim panel, and instrument panel (I/P) compartment door. Pull the radio Antenna Cable free from the extension cable and disconnect the grommet from the hinge pillar in an outbound direction. Connect a mechanics wire to the Antenna Cable, and then take the Antenna mast off along with the screws holding the Antenna Base. Remove the grommet and cable from the routing hole, remove the Antenna Cable from the veh, leaving the mechanice's wire to thread as a assemblying signal. For an installation, connect the mechanics wire to the end of the Antenna Cable and pull it for routing the cable and the grommet through the hinge pillar. Mount the screws that hold the Antenna Base and tighten them at 7.5 n.m (66 lb in). Then mount the Antenna mast. Unmount the Antenna extension cables nut from the Antenna Cable , unmount the end of the Antenna Cable from the front end of the Antenna extension cable, strip 2 inches of the Antenna extension cable , distribute marker on the wire , attach the mechanics wire on the Antenna Cable , crimp on 2 nuts and double lock the nuts , install the grommet to the hinge pillar , connect the radio Antenna Cable to the extension cable. Lastly, when assembling the light switch panel, the battery, and head lamp and taillamp assembly, install i/p compartment door, right hinge pillar trim panel, and right front door sill plate for the right door.