How to replace the power vacuum brake booster on 2008 Chevrolet Colorado?

Start by taking out the master cylinder system from its position. Pull down the knee bolster trim to access the Brake Booster Pushrod. Disconnect its retaining clip then both clevis pin and Pushrod from the Brake Pedal. Take off the booster mounting nuts and extract the booster from the vehicle. Position the Brake Booster inside the bulkhead and fasten it using mounting nuts before tightening them to 20 n.m (15 lb ft). Push the Brake Pedal Pushrod back into place and slide on its clevis pin. Secure both with the retaining clip. Adjust both switches after reinstalling the stop lamp switch and cruise control release switch. Complete the installation by placing back the knee bolster trim panel and the master cylinder assembly.

OEM 2008 Chevrolet Colorado Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2008 Chevrolet Colorado Brake Booster Part Number: 89040285
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
- Item Weight: 11.80 Pounds
- Item Dimensions: 11.9 x 16.0 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89040285
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 Chevrolet Colorado Brake Booster

With a comprehensive array of OEM 2008 Chevrolet Colorado Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Brake Booster Parts and Q&A

Q: How to replace the power vacuum brake booster on 2008 Chevrolet Colorado?
A: Start by taking out the master cylinder system from its position. Pull down the knee bolster trim to access the Brake Booster Pushrod. Disconnect its retaining clip then both clevis pin and Pushrod from the Brake Pedal. Take off the booster mounting nuts and extract the booster from the vehicle. Position the Brake Booster inside the bulkhead and fasten it using mounting nuts before tightening them to 20 n.m (15 lb ft). Push the Brake Pedal Pushrod back into place and slide on its clevis pin. Secure both with the retaining clip. Adjust both switches after reinstalling the stop lamp switch and cruise control release switch. Complete the installation by placing back the knee bolster trim panel and the master cylinder assembly.