How to replace the Body Control Module (BCM) on 2008 Chevrolet Corvette?

When replacing the Body Control Module turn off the ignition key to shield it from harmful electrical discharges and bcm internal malfunction. Disassemble the panel at the lower front floor right side before using your tool to unscrew bcm retaining screws. Take off the bcm by disconnecting its wiring from the bcm unit. Keep the Ignition Switch in off position during the setup process. Place the bcm on top of the multiuse bracket and then click in all its harness connectors. Place the three bcm retaining screws into their matching positions and fasten them to 2 n.m (18 lb in) torque setting. Finally, reinstall the kick-up panel. The bcm needs special setup when it goes into a new or replacement setup.

OEM 2008 Chevrolet Corvette Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
2008 Chevrolet Corvette Body Control Module Part Number: 20934684
$218.27 MSRP: $390.00
You Save: $171.73 (45%)
Product Specifications
- Other Name: Module Assembly-Body Control; Module; Module, Body Multi Function Electric Computer; Module, Door Electric And Vacuum Locks
- Replaces: 25832924, 20759656, 25879086
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 4.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20934684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Body Control Module

With a comprehensive array of OEM 2008 Chevrolet Corvette Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Body Control Module Parts and Q&A

Q: How to replace the Body Control Module (BCM) on 2008 Chevrolet Corvette?
A: When replacing the Body Control Module turn off the ignition key to shield it from harmful electrical discharges and bcm internal malfunction. Disassemble the panel at the lower front floor right side before using your tool to unscrew bcm retaining screws. Take off the bcm by disconnecting its wiring from the bcm unit. Keep the Ignition Switch in off position during the setup process. Place the bcm on top of the multiuse bracket and then click in all its harness connectors. Place the three bcm retaining screws into their matching positions and fasten them to 2 n.m (18 lb in) torque setting. Finally, reinstall the kick-up panel. The bcm needs special setup when it goes into a new or replacement setup.