How to replace the left side engine mount on 2008 Chevrolet Corvette?

The replacement of the left side Engine Mount begins with front suspension crossmember removal according to the proper procedure for both z06 and non-z06 models. First remove the Engine Mount-to-Engine Mount bracket nut before taking off the Engine Mount from its location. You should detach the Engine Mount heat shield from the Engine Mount when needed. Before Engine Mount installation you must mount the Engine Mount heat shield onto the mount then put in the mount. Following the fastener notice enables correct installation. Secure the Engine Mount-to-Engine Mount bracket nut while tightening it to 65 n.m (48 lb ft). To finish the replacement sequence the front suspension crossmember must be reinstalled using the model-specific procedures.

OEM 2008 Chevrolet Corvette Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Engine Mounts found

View related parts
2008 Chevrolet Corvette Motor Mount Part Number: 15254700
$80.15 MSRP: $136.45
You Save: $56.30 (42%)
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mounting
- Replaces: 10284134
- Item Weight: 3.70 Pounds
- Item Dimensions: 8.2 x 5.4 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15254700
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Mount Bracket, Driver Side Part Number: 10349964
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.5 x 6.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10349964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Grand Sport, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Mount Bracket, Passenger Side Part Number: 10349965
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 6.4 x 6.1 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10349965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Grand Sport, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Engine Mount

With a comprehensive array of OEM 2008 Chevrolet Corvette Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Engine Mount Parts and Q&A

Q: How to replace the left side engine mount on 2008 Chevrolet Corvette?
A: The replacement of the left side Engine Mount begins with front suspension crossmember removal according to the proper procedure for both z06 and non-z06 models. First remove the Engine Mount-to-Engine Mount bracket nut before taking off the Engine Mount from its location. You should detach the Engine Mount heat shield from the Engine Mount when needed. Before Engine Mount installation you must mount the Engine Mount heat shield onto the mount then put in the mount. Following the fastener notice enables correct installation. Secure the Engine Mount-to-Engine Mount bracket nut while tightening it to 65 n.m (48 lb ft). To finish the replacement sequence the front suspension crossmember must be reinstalled using the model-specific procedures.