OEM 2008 Chevrolet Corvette Lash Adjuster

2008 Chevrolet Corvette Lash Adjuster Parts Questions & Experts Answers

• Q: How to replace the Lash Adjusters on 2008 Chevrolet Corvette?

  A: The first step requires Cylinder Head removal before guide bolts (211) and guides (210) alongside lifters can be extracted. You must remember the original guide position because their notched area requires precise alignment with the block's locating tab. Remove valve lifters (209) from guide (210) before creating an installation plan for original placement. Before installation lubricate all parts of valve lifters (209) and engine block valve lifter bores with new engine oil before putting the lifters in the lifter guides (210). Align the flat areas between the lifter top and guide bore and push the lifters fully into position. Place the valve lifters and guide assembly (210) onto the engine block while following fastener notice instructions and run the valve lifter guide bolts (211) to 10 n.m (89 lb in). Finally, reinstall the Cylinder Head.