OEM 2007 Chevrolet Corvette Lash Adjuster

2007 Chevrolet Corvette Lash Adjuster Parts Questions & Experts Answers

• Q: How to replace the Lash Adjusters on 2007 Chevrolet Corvette?

  A: Start by removing the Cylinder Head then take out guide bolts (211) along with guides (210) accompanied by lifters while documenting the original guide positions because the notched area should face the block's locating tab. Start by removing valve lifters (209) from guide (210) and create a system to keep track of their installation order. Secure the valve lifters within their initial positions during replacement before you must replace all valve lifters whenever you replace the Camshaft. Start by adding clean engine oil both to the valve lifters (209) and to the block's valve lifter bore before placing valve lifters (209) into the lifter guides (210) while pointing their flat upper surface toward the flat area in the guide bore and carefully pushing each lifter through the entire length of its guide bore. The installation sequence begins with engine block placement of valve lifters and guide assembly (210) followed by valve lifter guide bolts (211) installation before Cylinder Head attachment. Follow the service precautions fastener notice during installation. This procedure needs a valve lifter remover tool known as j 3049-a.