How to replace the rear transverse leaf spring on 2008 Chevrolet Corvette?

First raise and support the vehicle before transverse spring replacement begins. The first step begins with tire and wheel removal. Take special caution to avoid scratching the transverse spring throughout this procedure. Focus on compressing the transverse spring through usage of the transverse spring compressor (J 33432-A). Start by removing a lower Control Arm followed by the transverse spring mounting bolts and retainers. Discard the old mounting bolts before continuing. Detach the transverse spring from your vehicle and remove the transverse spring compressor (J 33432-A) in case you plan to install a new spring. Erraration during spring installation requires you to reconnect the transverse spring compressor tool (J 33432-A) for compressing the spring until ready to attach it to the crossmember assembly. Start by mounting new transverse spring retainer-to-crossmember bolts to the crossmember before placing the transverse spring retainers and their new mounting bolts. Tighten all bolts to 62 n.m (46 lb ft). Reinstall the lower Control Arm to the Rear Crossmember followed by removal of the transverse spring compressor (J 33432-A). After completing installation reinstall the tire wheel assemblies and execute a rear wheel alignment but only if you added a new transverse spring require height adjustment to the rear trim.

OEM 2008 Chevrolet Corvette Leaf Spring

Leaf Helper Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Leaf Springs found

View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 25962579
$356.08 MSRP: $560.26
You Save: $204.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.50 Pounds
- Item Dimensions: 50.2 x 4.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25962579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 15233390
$340.61 MSRP: $535.93
You Save: $195.32 (37%)
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 15233388
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 10.60 Pounds
- Item Dimensions: 48.5 x 5.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233388
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 15233392
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.30 Pounds
- Item Dimensions: 49.6 x 4.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 15233386
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 11.00 Pounds
- Item Dimensions: 48.3 x 4.8 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15233386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Spring, Rear
Part Number: 25962580
$357.80 MSRP: $562.99
You Save: $205.19 (37%)
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Replaces: 15233389
- Item Weight: 11.50 Pounds
- Item Dimensions: 48.3 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25962580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Leaf Spring

With a comprehensive array of OEM 2008 Chevrolet Corvette Leaf Spring, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Leaf Spring are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Leaf Spring Parts Questions & Experts Answers

Q: How to replace the rear transverse leaf spring on 2008 Chevrolet Corvette?
A: First raise and support the vehicle before transverse spring replacement begins. The first step begins with tire and wheel removal. Take special caution to avoid scratching the transverse spring throughout this procedure. Focus on compressing the transverse spring through usage of the transverse spring compressor (J 33432-A). Start by removing a lower Control Arm followed by the transverse spring mounting bolts and retainers. Discard the old mounting bolts before continuing. Detach the transverse spring from your vehicle and remove the transverse spring compressor (J 33432-A) in case you plan to install a new spring. Erraration during spring installation requires you to reconnect the transverse spring compressor tool (J 33432-A) for compressing the spring until ready to attach it to the crossmember assembly. Start by mounting new transverse spring retainer-to-crossmember bolts to the crossmember before placing the transverse spring retainers and their new mounting bolts. Tighten all bolts to 62 n.m (46 lb ft). Reinstall the lower Control Arm to the Rear Crossmember followed by removal of the transverse spring compressor (J 33432-A). After completing installation reinstall the tire wheel assemblies and execute a rear wheel alignment but only if you added a new transverse spring require height adjustment to the rear trim.