How to replace the Rear Ride Height Sensor on 2008 Chevrolet Corvette?

Start by turning off the Ignition Switch and supporting the vehicle while raising it before beginning replacement of the electronic suspension rear position sensor. The first step is to disconnect and remove the tire wheel assembly before uninstalling both the electronic suspension control (ESC) position sensor harness connector and position sensor link from its attachment to the control arm link stud. Begin by taking out the position sensor through its mounting bolt removal from the vehicle. After putting the position sensor onto the vehicle complete the installation process by following the given fastener notice. Fasten the position sensor mounting bolt with a torque of 7 n.m (62 lb in). Install the position sensor link to connect with the control arm link stud and restore the esc position harness connector. Complete the procedure by reinstalling the tire and wheel assembly followed by lowering the vehicle.

OEM 2008 Chevrolet Corvette Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ride Height Sensors found

View related parts
2008 Chevrolet Corvette Position Sensor
Part Number: 89047645
$299.13 MSRP: $536.56
You Save: $237.43 (45%)
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Accelerometer); Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.1 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Position Sensor
Part Number: 89047644
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Accelerometer); Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.2 x 4.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Position Sensor
Part Number: 89047642
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Suspension Ride Height Sensor; Ride Height Sensor; Front Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047642
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Position Sensor
Part Number: 89047643
$222.90 MSRP: $399.82
You Save: $176.92 (45%)
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Suspension Ride Height Sensor; Ride Height Sensor; Front Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2008 Chevrolet Corvette Ride Height Sensor

With a comprehensive array of OEM 2008 Chevrolet Corvette Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the Rear Ride Height Sensor on 2008 Chevrolet Corvette?
A: Start by turning off the Ignition Switch and supporting the vehicle while raising it before beginning replacement of the electronic suspension rear position sensor. The first step is to disconnect and remove the tire wheel assembly before uninstalling both the electronic suspension control (ESC) position sensor harness connector and position sensor link from its attachment to the control arm link stud. Begin by taking out the position sensor through its mounting bolt removal from the vehicle. After putting the position sensor onto the vehicle complete the installation process by following the given fastener notice. Fasten the position sensor mounting bolt with a torque of 7 n.m (62 lb in). Install the position sensor link to connect with the control arm link stud and restore the esc position harness connector. Complete the procedure by reinstalling the tire and wheel assembly followed by lowering the vehicle.