How to replace the Brake Light Switch on 2008 Chevrolet Express 2500?

You can start switch replacement by detaching both the battery negative cable and electrical connector from the stop lamp switch. Pull the brake pedal pin retainer and slide out both the stop lamp switch and its Pushrod assembly from the brake pedal pin. Detach the stop lamp switch from its position on the power Brake Booster Pushrod. Install the stop lamp switch onto the power Brake Booster Pushrod then put it on the brake pedal pins with the Pushrod attached before fixing it into place using the brake switch retainer. Reattach the electrical wire to the stop lamp switch before closing the power connection.

OEM 2008 Chevrolet Express 2500 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chevrolet Express 2500 Stoplamp Switch
Part Number: 15861245
$25.31 MSRP: $45.20
You Save: $19.89 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Stop Lamp; Brake Light Switch; Switch, Stop Lamp Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15861245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2008 Chevrolet Express 2500 Brake Light Switch

With a comprehensive array of OEM 2008 Chevrolet Express 2500 Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Express 2500 Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Express 2500 Brake Light Switch Parts Questions & Experts Answers

Q: How to replace the Brake Light Switch on 2008 Chevrolet Express 2500?
A: You can start switch replacement by detaching both the battery negative cable and electrical connector from the stop lamp switch. Pull the brake pedal pin retainer and slide out both the stop lamp switch and its Pushrod assembly from the brake pedal pin. Detach the stop lamp switch from its position on the power Brake Booster Pushrod. Install the stop lamp switch onto the power Brake Booster Pushrod then put it on the brake pedal pins with the Pushrod attached before fixing it into place using the brake switch retainer. Reattach the electrical wire to the stop lamp switch before closing the power connection.