Make sure this part fits

GM 15861245
Stoplamp Switch

2007-2011 GM

Customer Questions & Expert Answers (5)
GM 15861245 Stoplamp Switch
GM 15861245 Stoplamp Switch
  • Part Description
    Switch Assembly-Stop Lamp; Brake Light Switch
  • Manufacturer
    General Motors
Make sure this part fits
$24.55 MSRP: $46.10
You Save: $21.55 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Cadillac EscaladeBase, Hybrid, Platinum8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2009 Cadillac Escalade EXTBase8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2009 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2008-2011 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2008-2011 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2008-2011 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2009 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2011, 2007-2009 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2011, 2007-2009 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2007-2009 Chevrolet Suburban 1500LT, LTZ8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15861245 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15861245 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Light Switch on Cadillac Escalade? Posted by Customer
    A:
    Begin by removing the driver knee bolster and dissembling the fuse block cover before the brake pedal position sensor replacement starts. Under brake pedal position sensor bolts you have to separate the electrical connector to gain access and remove the brake pedal position sensor. Secure the brake pedal position sensor within the vehicle by tightening its bolts to 9 Nm (80 lb in). Secure the pedal position sensor electric connections back in place then place the fuse block cover and driver knee bolster back into their original position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Light Switch on Chevrolet Express 2500? Posted by Customer
    A:
    To replace the stop lamp switch start by disconnecting the battery negative cable. Detach the electrical link from the stop lamp switch before you remove its retainer from the brake pedal pin and extract the entire unit with its Pushrod to the power Brake Booster assembly. You must remove the stop lamp switch from its place on the power Brake Booster Pushrod. Without installing the stop lamp switch on the power Brake Booster Pushrod it cannot snap onto place. Attach the stop lamp switch after positioning it correctly with the Pushrod on the brake pedal pin then tighten with the brake switch retainer. Reattach the electrical connector to the stop lamp switch and connect the battery negative terminal.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Light Switch on GMC Savana 1500? Posted by Customer
    A:
    To replace the stop lamp switch, you will first disconnect the battery negative cable. Now, remove the electrical connector from stop lamp switch and haul out the retainer pin from the brake pedal. Then remove the stop lamp switch and the Pushrod to the power Brake Booster from the brake pedal pin and unsnap the stop lamp switch from the push rod to the power Brake Booster. For the installation, snap the stop lamp switch onto the power Brake Booster Pushrod and install the stop lamp switch on the brake pedal pin with the Pushrod and hold it in its place using the brake switch retainer. After that connect the electrical connector to stop lamp switch then reconnected the battery negative cable too.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the stop lamp switch during installation for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Install the stop lamp switch with the pushrod on the brake pedal pin and secure it with the brake switch retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stoplamp Switch 15861245 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15861245 Stoplamp Switch is available in the market under the name GM Brake Light Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15861245 Stoplamp Switch fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 15861245 maintains top performance when functioning as the Switch Assembly-Stop Lamp; Brake Light Switch unit. The component 15861245 is constructed from durable material and its dimensions span 4.1 x 2.2 x 0.9 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Stop Lamp Switch. The part 15861245 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.