OEM 2008 Chevrolet Express 3500 Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

  • 2008 Chevy Express 3500 Brake Master Cylinder - 19209189
    2008 Chevy Express 3500 Brake Master Cylinder Diagram - 19209189
    View related parts
    Product Specifications
    • Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
    • Replaces: 15146189, 15106442
    • Item Weight: 3.00 Pounds
    • Item Dimensions: 9.7 x 7.3 x 9.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19209189
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 Chevrolet Express 3500 Submodels:
    • Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
  • 2008 Chevy Express 3500 Brake Master Cylinder - 25865166
    2008 Chevy Express 3500 Brake Master Cylinder Diagram - 25865166
    View related parts
    Product Specifications
    • Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
    • Replaces: 15795984, 15795983
    • Item Weight: 3.80 Pounds
    • Item Dimensions: 14.7 x 8.5 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25865166
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 Chevrolet Express 3500 Submodels:
    • Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2008 Chevrolet Express 3500 Brake Master Cylinder

With a comprehensive array of OEM 2008 Chevrolet Express 3500 Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Express 3500 Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Express 3500 Brake Master Cylinder Parts Questions & Experts Answers

  • Q: How to replace the brake master cylinder on 2008 Chevrolet Express 3500?
    A: Before starting work apply the parking brake and block the wheels. Detach the electrical connection to the Brake Fluid Level Sensor when present and take off the driver side fender support section. To protect brake fluids during brake pipe replacement install rubber plugs over each brake pipe fitting end. Seal off the master cylinder ports using rubber plugs after disconnecting brake pipes from it. At nodes jl4 vehicles you need to crimp the master cylinder hose to seal the fluid from leaking. Seal the reservoir port by plugging it in and take off the clamp and hose from the reservoir. Take out the master cylinder from the vehicle starting with its mounting nuts removal then proceed with the master cylinder reservoir. Start by placing the master cylinder reservoir into its installation position. First bleed the parking brake from the master cylinder then reinsert it to the vehicle. Put on the master cylinder mounting nuts and fasten them to a torque of 36 n.m (27 lb ft). Install hose and clamp into reservoir's port for vehicles with jl4 after detaching the reservoir plug. Then take off the crimping tool from hose. Join the brake pipes by removing rubber caps from open brake pipe ends. Tighten these fittings to 25 n.m (18 lb ft) torque. Install back the driver side fender support while connecting the electrical cable to the brake level sensor. End the hydraulic braking process after freeing the parking brake and wheel blockers.

Related 2008 Chevrolet Express 3500 Parts